MC68HC708XL36 FREESCALE [Freescale Semiconductor, Inc], MC68HC708XL36 Datasheet - Page 242

• Manufacturer Part Number: MC68HC708XL36
• Description: HCMOS Microcontroller Unit
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

SCI
MC68HC708XL36
242
At the start of a transmission, transmitter control logic automatically
loads the transmit shift register with a preamble of logic 1s. After the
preamble shifts out, control logic transfers the SCDR data into the
transmit shift register. A logic 0 start bit automatically goes into the least
significant bit position of the transmit shift register. A logic 1 stop bit goes
into the most significant bit position.
The SCI transmitter empty bit, SCTE, in SCS1 becomes set when the
SCDR transfers a byte to the transmit shift register. The SCTE bit
indicates that the SCDR can accept new data from the internal data bus.
If the SCI transmit interrupt enable bit, SCTIE, in SCC2 is also set, the
SCTE bit generates a transmitter CPU interrupt request or a transmitter
DMA service request.
The SCTE bit generates a transmitter DMA service request if the DMA
transfer enable bit, DMATE, in SCI control register 3 (SCC3) is set.
Setting the DMATE bit enables the SCTE bit to generate transmitter
DMA service requests and disables transmitter CPU interrupt requests.
When the transmit shift register is not transmitting a character, the TxD
pin goes to the idle condition, logic 1. If at any time software clears the
ENSCI bit in SCI control register 1 (SCC1), the transmitter and receiver
relinquish control of the port E pins.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
SCI
MOTOROLA
8-sci_d