MC68HC708XL36 FREESCALE [Freescale Semiconductor, Inc], MC68HC708XL36 Datasheet - Page 256

no-image

MC68HC708XL36

Manufacturer Part Number
MC68HC708XL36
Description
HCMOS Microcontroller Unit
Manufacturer
FREESCALE [Freescale Semiconductor, Inc]
Datasheet
SCI
Receiver Wakeup
MC68HC708XL36
256
NOTE:
So that the MCU can ignore transmissions intended only for other
receivers in multiple-receiver systems, the receiver can be put into a
standby state. Setting the receiver wakeup bit, RWU, in SCC2 puts the
receiver into a standby state during which receiver interrupts are
disabled.
Depending on the state of the WAKE bit in SCC1, either of two
conditions on the RxD pin can bring the receiver out of the standby state:
With the WAKE bit clear, setting the RWU bit after the RxD pin has been
idle may cause the receiver to wake up immediately.
Freescale Semiconductor, Inc.
For More Information On This Product,
Address mark — An address mark is a logic 1 in the most
significant bit position of a received character. When the WAKE bit
is set, an address mark wakes the receiver from the standby state
by clearing the RWU bit. The address mark also sets the SCI
receiver full bit, SCRF. Software can then compare the character
containing the address mark to the user-defined address of the
receiver. If they are the same, the receiver remains awake and
processes the characters that follow. If they are not the same,
software can set the RWU bit and put the receiver back into the
standby state.
Idle input line condition — When the WAKE bit is clear, an idle
character on the RxD pin wakes the receiver from the standby
state by clearing the RWU bit. The idle character that wakes the
receiver does not set the receiver idle bit, IDLE, or the SCI receiver
full bit, SCRF. The idle line type bit, ILTY, determines whether the
receiver begins counting logic ones as idle character bits after the
start bit or after the stop bit.
Go to: www.freescale.com
SCI
MOTOROLA
22-sci_d

Related parts for MC68HC708XL36