LM2661MM NSC [National Semiconductor], LM2661MM Datasheet

no-image

LM2661MM

Manufacturer Part Number
LM2661MM
Description
Switched Capacitor Voltage Converter
Manufacturer
NSC [National Semiconductor]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LM2661MM
Manufacturer:
NS
Quantity:
23
Part Number:
LM2661MM
Manufacturer:
NS/国半
Quantity:
20 000
Part Number:
LM2661MM/NOPB
Manufacturer:
NS
Quantity:
12 779
Part Number:
LM2661MMX
Manufacturer:
NS/国半
Quantity:
20 000
© 1999 National Semiconductor Corporation
LM2660/LM2661
Switched Capacitor Voltage Converter
General Description
The LM2660/LM2661 CMOS charge-pump voltage con-
verter inverts a positive voltage in the range of 1.5V to 5.5V
to the corresponding negative voltage. The LM2660/LM2661
uses two low cost capacitors to provide 100 mA of output
current without the cost, size, and EMI related to inductor
based converters. With an operating current of only 120 µA
and operating efficiency greater than 90% at most loads, the
LM2660/LM2661 provides ideal performance for battery
powered systems. The LM2660/LM2661 may also be used
as a positive voltage doubler.
The oscillator frequency can be lowered by adding an exter-
nal capacitor to the OSC pin. Also, the OSC pin may be used
to drive the LM2660/LM2661 with an external clock. For
LM2660, a frequency control (FC) pin selects the oscillator
frequency of 10 kHz or 80 kHz. For LM2661, an external
shutdown (SD) pin replaces the FC pin. The SD pin can be
used to disable the device and reduce the quiescent current
to 0.5 µA. The oscillator frequency for the LM2661 is 80 kHz.
Basic Application Circuits
Voltage Inverter
DS012911
DS012911-3
Splitting V
IN
Features
n Inverts or doubles input supply voltage
n Narrow SO-8 and Mini SO-8 Package
n 6.5
n 88% typical conversion efficiency at 100 mA
n (LM2660) selectable oscillator frequency: 10 kHz/80 kHz
n (LM2661) low current shutdown mode
Applications
n Laptop computers
n Cellular phones
n Medical instruments
n Operational amplifier power supplies
n Interface power supplies
n Handheld instruments
in Half
typical output resistance
Positive Voltage Doubler
DS012911-26
September 1999
www.national.com
DS012911-4

Related parts for LM2661MM

LM2661MM Summary of contents

Page 1

LM2660/LM2661 Switched Capacitor Voltage Converter General Description The LM2660/LM2661 CMOS charge-pump voltage con- verter inverts a positive voltage in the range of 1.5V to 5.5V to the corresponding negative voltage. The LM2660/LM2661 uses two low cost capacitors to provide 100 ...

Page 2

Absolute Maximum Ratings If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (V+ to GND, or GND to OUT) LV (OUT − 0.3V) to (GND + 3V) FC, OSC ...

Page 3

Test Circuits FIGURE 1. LM2660 and LM2661 Test Circuits Typical Performance Characteristics Supply Current vs Supply Voltage DS012911-7 Output Source Resistance vs Temperature DS012911-10 DS012911-5 (Circuit of Figure 1 ) Supply Current vs Oscillator Frequency DS012911-8 Efficiency vs Load Current ...

Page 4

Typical Performance Characteristics Efficiency vs Oscillator Frequency DS012911-13 Oscillator Frequency vs Supply Voltage (FC = V+) DS012911-16 Oscillator Frequency vs Temperature (FC = Open) DS012911-19 www.national.com (Circuit of Figure 1 ) (Continued) Output Voltage vs Oscillator Frequency DS012911-14 Oscillator Frequency ...

Page 5

... Connection Diagrams DS012911-1 Order Number LM2660M, LM2661M, LM2660MM or LM2661MM See NS Package Number M08A and MUA08A Ordering Information Order Number Package Number LM2660M M08A LM2660MX M08A LM2660MM MUA08A LM2660MMX MUA08A LM2661M M08A LM2661MX M08A LM2661MM MUA08A LM2661MMX MUA08A Note 9: The first letter “S” identifies the part as a switched capacitor converter. The next two numbers are the device number: “01” for a LM2660 device, and “02” ...

Page 6

Pin Description Pin Name Voltage Inverter 1 FC Frequency control for internal oscillator open kHz (typ); (LM2660) OSC kHz (typ); OSC FC has no effect when OSC pin is ...

Page 7

Application Information (Continued) The peak-to-peak output voltage ripple is determined by the oscillator frequency, and the capacitance and ESR of the output capacitor Again, using a low ESR capacitor will result in lower ripple. POSITIVE VOLTAGE DOUBLER ...

Page 8

Application Information size capacitor usually has a higher ESR compared with a bigger size capacitor of the same type. For lower ESR, use ceramic capacitors. FIGURE 3. Output Source Resistance vs Oscillator Frequency Manufacturer Phone Nichicon Corp. (708)-843-7500 AVX Corp. ...

Page 9

Other Applications (Continued) CASCADING DEVICES Cascading the LM2660s (or LM2661s easy way to produce a greater negative voltage (as shown in Figure the integer representing the number of devices cascaded, the unloaded output ...

Page 10

Other Applications (Continued) REGULATING V out It is possible to regulate the output of the LM2660/LM2661 by use of a low dropout regulator (such as LP2951). The whole con- verter is depicted in Figure 8 . This converter can give ...

Page 11

Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead SO (M) Order Number LM2660M or LM2661M NS Package Number M08A 11 www.national.com ...

Page 12

... National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. 8-Lead Mini SO (MM) Order Number LM2660MM or LM2661MM NS Package Number MUA08A 2. A critical component is any component of a life ...

Related keywords