M30622MA-XXXFP RENESAS [Renesas Technology Corp], M30622MA-XXXFP Datasheet - Page 53

no-image

M30622MA-XXXFP

Manufacturer Part Number
M30622MA-XXXFP
Description
16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
Manufacturer
RENESAS [Renesas Technology Corp]
Datasheet
Bus Control
38
Table 1.12.6. Microcomputer status in hold state
Figure 1.12.4. Bus-using priorities
Table 1.12.7. External bus status when the internal area is accessed
__________
Oscillation
R/W signal, address bus, data bus, CS, BHE
Programmable I/O ports
HLDA
Internal peripheral circuits
ALE signal
(6) Hold signal
(7) External bus status when the internal area is accessed
Item
Address bus
Data bus
RD, WR, WRL, WRH
BHE
CS
ALE
The hold signal is used to transfer the bus privileges from the CPU to the external circuits. Inputting “L” to
the HOLD pin places the microcomputer in the hold state at the end of the current bus access. This status
is maintained and “L” is output from the HLDA pin as long as “L” is input to the HOLD pin. Table 1.12.6
shows the microcomputer status in the hold state.
Bus-using priorities are given to HOLD, DMAC, and CPU in order of decreasing precedence.
Table 1.12.7 shows the external bus status when the internal area is accessed.
___
__________
When read
When write
Item
SFR accessed
Address output
Floating
Output data
RD, WR, WRL, WRH output
BHE output
Output "H"
Output "L"
P0, P1, P2, P3, P4, P5
P6, P7, P8, P9, P10
__________
_____
__________
HOLD > DMAC > CPU
_______
__________
ON
Floating
Floating
Maintains status when hold signal is received
Output “L”
ON (but watchdog timer stops)
Undefined
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Internal ROM/RAM accessed
Maintain status before accessed
address of external area
Floating
Undefined
Output "H"
Maintain status before accessed
status of external area
Output "H"
Output "L"
Status
__________
Mitsubishi microcomputers
M16C / 62 Group

Related parts for M30622MA-XXXFP