AM29LV800T-100EC Advanced Micro Devices, AM29LV800T-100EC Datasheet

no-image

AM29LV800T-100EC

Manufacturer Part Number
AM29LV800T-100EC
Description
Manufacturer
Advanced Micro Devices
Datasheet

Specifications of AM29LV800T-100EC

Case
TSOP48
Date_code
2006+
Am29LV800T/Am29LV800B
8 Megabit (1,048,576 x 8-Bit/524,288 x 16-Bit)
CMOS 3.0 Volt-only, Sectored Flash Memory
DISTINCTIVE CHARACTERISTICS
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice.
Single power supply operation
— Extended voltage range: 2.7 to 3.6 volt read and
— Standard voltage range: 3.0 to 3.6 volt read and
High performance
— Extended voltage range: access times as fast as
— Standard voltage range: access times as fast as
Ultra low power consumption
— Automatic Sleep Mode: 200 nA typical
— Standby mode: 200 nA typical
— Read mode: 2 mA/MHz typical
— Program/erase mode: 20 mA typical
Flexible sector architecture
— One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and
— One 8 Kword, two 4 Kword, one 16 Kword, and
— Supports control code and data storage on a
— Sector Protection features:
Top or bottom boot block configurations
available
write operations for battery-powered
applications
write operations and for compatibility with high
performance 3.3 volt microprocessors
100 ns
90 ns
fifteen 64 Kbyte sectors (byte mode)
fifteen 32 Kword sectors (word mode)
single device
A hardware method of locking a sector to
prevent any program or erase operations within
that sector
Temporary Sector Unprotect feature allows code
changes in previously locked sectors
PRELIMINARY
Refer to AMD’s Website (www.amd.com) for the latest information.
Embedded Algorithms
— Embedded Erase algorithms automatically
— Embedded Program algorithms automatically
Minimum 100,000 write cycle guarantee per
sector
Package options
— 48-pin TSOP
— 44-pin SO
Compatibility with JEDEC standards
— Pinout and software compatible with single-
— Superior inadvertent write protection
Data Polling and toggle bits
— Provides a software method of detecting
Ready/Busy pin (RY/BY)
— Provides a hardware method of detecting
Erase suspend/resume commands
— Suspends the erase operation to read data from
Hardware reset pin (RESET)
— Hardware method to reset the device to the read
preprogram and erase the entire chip or any
combination of designated sectors
write and verify bytes or words at specified
addresses
power supply Flash
program or erase operation completion
program or erase cycle completion
or program data to another sector, then resumes
the erase operation
mode
Publication# 20478
Issue Date: November 1997
Rev: D Amendment/0

Related parts for AM29LV800T-100EC

Related keywords