ICX209 SONY [Sony Corporation], ICX209 Datasheet

no-image

ICX209

Manufacturer Part Number
ICX209
Description
Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras
Manufacturer
SONY [Sony Corporation]
Datasheet
Description
sensor suitable for PAL color video cameras.
Compared with the current product ICX069AK,
sensitivity and saturation signal are improved drastically
through the adoption of Super HAD CCD technology.
High resolution is achieved through the use of Ye,
Cy, Mg, and G complementary color mosaic filters.
an electronic shutter with variable charge-storage time.
Features
• High sensitivity (+4dB compared with ICX069AK)
• High saturation signal
• Horizontal register:
• Reset gate:
• No voltage adjustment
• High resolution, low smear and low dark current
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
• Recommended range of exit pupil distance: –20 to –100mm
• Ye, Cy, Mg, and G complementary color mosaic filters on chip
Device Structure
• Interline CCD image sensor
• Image size:
• Number of effective pixels:
• Total number of pixels:
• Chip size:
• Unit cell size:
• Optical black:
• Number of dummy bits:
• Substrate material:
Super HAD CCD is a registered trademark of Sony Corporation. Super HAD CCD is a CCD that drastically improves sensitivity by introducing
newly developed semiconductor technology by Sony Corporation into Sony's high-performance HAD (Hole-Accumulation Diode) sensor.
The ICX209AK is an interline CCD solid-state image
This chip features a field period readout system and
The package is a 10mm-square 14-pin DIP (Plastic).
(+2.5dB compared with ICX069AK)
(Reset gate and substrate bias are not adjusted.)
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras
3.3 to 5.0V drive
3.3 to 5.0V drive
Diagonal 4.5mm (Type 1/4)
752 (H)
795 (H)
4.47mm (H)
4.85µm (H)
Horizontal (H) direction: Front 3 pixels, rear 40 pixels
Vertical (V) direction:
Horizontal 22
Vertical 1 (even fields only)
Silicon
582 (V) approx. 440K pixels
596 (V) approx. 470K pixels
4.65µm (V)
3.80mm (V)
– 1 –
Front 12 pixels, rear 2 pixels
3
V
ICX209AK
Pin 8
Optical black position
14 pin DIP (Plastic)
(Top View)
H
Pin 1
40
12
2
E97139C99

Related parts for ICX209

ICX209 Summary of contents

Page 1

... Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras Description The ICX209AK is an interline CCD solid-state image sensor suitable for PAL color video cameras. Compared with the current product ICX069AK, sensitivity and saturation signal are improved drastically through the adoption of Super HAD CCD technology. ...

Page 2

... Horizontal register transfer clock 1 H Horizontal register transfer clock 2 Ratings Unit – –50 to +15 V –50 to +0.3 V –40 to +0.3 V –0.3 to +18 V –10 to +18 V – –0.3 to +28 V –0 +15 V – –13 to +13 V –30 to +80 °C –10 to +60 °C ICX209AK Remarks 1 ...

Page 3

... V VL VL3 – High-level coupling V 2 High-level coupling V 2 Low-level coupling V 2 Low-level coupling Input through 0.1µ capacitance V 4 Low-level coupling V 4 Low-level coupling V 5 ICX209AK L )/2 VH2 )/2 VL4 ...

Page 4

... V23 C V13 Horizontal transfer clock equivalent circuit C RG – 4 – Typ. Max. Unit 680 pF 470 pF 330 pF 270 180 pF Ω 82 Ω 15 Ω 12 Ω ICX209AK Remarks H 2 ...

Page 5

... twh VHH V VHL V VHL V VL3 VHL V VLH V VLL V VL4 – 5 – VHH VHH V VHL V VH3 V VLL VHH VHH VHL VHL V VH4 V VLH V VL ICX209AK V VLH ...

Page 6

... CCD) tr twh twl Point A is the minimum value of the coupling waveform during the period from RGLL . RGLm 100% 90% V SUB 10 twh – 6 – twl tr twh tf V RGH RGL is the average value of V RGL ICX209AK and RGLH ...

Page 7

... H two Min. Typ – 7 – Unit Remarks 0.5 0.5 µs 15 250 ns 6.5 9.5 6.5 9.5 ns 6.5 9.5 6.5 9.5 0.01 0.01 µs 0.01 0. 0.5 0.5 µs ) for the H rising side of the Unit Remarks Max and H is two ICX209AK During readout 1 2 During drain charge and ...

Page 8

... S H LPF2 S H (3dB down 1MHz) – 8 – Unit Measurement method Chroma signal output ICX209AK (Ta = 25°C) Remarks Ta = 60°C Zone 0 and I Zone 60° 60°C ...

Page 9

... Ye A1 mixed by pairs such as A1 and A2 in the A field. (pairs such the B field result, the sequence of charges output as signals from Ye A2 the horizontal shift register (Hreg) is, for line A1 Cy), G ( Cy), and (Mg + Ye). Hreg 1/2 1/2 – 9 – ICX209AK ...

Page 10

... Crmin)/200 | ∆ (Cbmax – Cbmin)/200 | 2 , color temperature of 3200K halogen source subject. (Pattern Mg [mV]) at the center of the screen with frame readout Cy 100 [%] (1/10V method conversion value) 100 [%] 100 [%] 100 [%] – 10 – [mV]) and G signal output (S [mV]), and Ye G ICX209AK ...

Page 11

... Adjust the Y signal output value generated by strobe light to 200mV. After setting the strobe light so that it strobes with the following timing, measure the residual signal (Ylag). Substitute the value into the following formula. Lag = (Ylag/200) 100 [%] FLD V1 Strobe light timing Output Light Y signal output 200mV Ylag (lag) – 11 – ICX209AK ...

Page 12

... ICX209AK ...

Page 13

... Spectral Sensitivity Characteristics (excludes both lens characteristics and light source characteristics) 1.0 0.8 0.6 0.4 0.2 0.0 400 Sensor Readout Clock Timing Chart V1 V2 Odd Field Even Field 450 500 550 Wave Length [nm] 1.5 33.6 0.2 – 13 – 600 650 700 2.6 2.6 2.6 2.6 Unit: µs ICX209AK ...

Page 14

... ICX209AK ...

Page 15

... ICX209AK ...

Page 16

... If a load is applied to the entire surface by a hard component, bending stress may be generated and the package may fracture, etc., depending on the flatness of the bottom of the package. Therefore, for installation, use either an elastic load, such as a spring plate adhesive. 50N 50N Compressive strength – 16 – ICX209AK 1.2Nm Torsional strength ...

Page 17

... This package has 2 kinds of internal structure. However, their package outline, optical size, and strength are the same. Cross section of lead frame The cross section of lead frame can be seen on the side of the package for structure A. Structure A Package Chip Metal plate (lead frame) – 17 – ICX209AK Structure B ...

Page 18

... ICX209AK ...

Related keywords