SiT8102AC-13-33E-100.00000X SiTime, SiT8102AC-13-33E-100.00000X Datasheet - Page 8

no-image

SiT8102AC-13-33E-100.00000X

Manufacturer Part Number
SiT8102AC-13-33E-100.00000X
Description
Programmable Oscillators 100MHz +/-50ppm 3.3V +/-10% -10C+70C
Manufacturer
SiTime
Series
SiT8102r

Specifications of SiT8102AC-13-33E-100.00000X

Rohs
yes
Package / Case
2.5 mm x 2 mm
Frequency
100 MHz
Frequency Stability
+/- 50 PPM
Supply Voltage
3.3 V
Load Capacitance
15 pF
Termination Style
SMD/SMT
Minimum Operating Temperature
- 20 C
Maximum Operating Temperature
+ 70 C
Dimensions
2 mm W x 2.5 mm L x 0.75 mm H
Mounting Style
SMD/SMT
Product
Programmable
Supply Voltage - Max
3.63 V
Supply Voltage - Min
2.97 V
Package Information
Notes:
Dimension (mm)
© SiTime Corporation 2010. The information contained herein is subject to change at any time without notice. SiTime assumes no responsibility or liability for any loss, damage or defect of a
Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect or accident, (iii)
unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or (iv) improper
installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress.
Disclaimer: SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by
operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing or
usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any sitime product and any product documentation. products sold by
sitme are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved or
at stake. all sales are made conditioned upon compliance with the critical uses policy set forth below.
CRITICAL USE EXCLUSION POLICY
BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR FACILITIES
OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE.
SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products
does not convey or imply any license under patent or other rights.
the sale of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be
strictly prohibited.
Rev. 1.10
4. Y top marking denotes manufacturing origin. The value of “Y” will depend on the assembly location of the device.
5. XXXXtop marking denotes manufacturing lot number.
6. A capacitor of value 0.1μF between VDD and GND is recommended.
7. The 7050 package with part number designation "-8" has NO center pad.
SiT8102
1 to 200 MHz High Performance Oscillator
YXXXX
7.0 ± 0.15
(continued)
5.08
1.7
[4,5]
1.4
SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to
No Connect [7]
Page 8 of 8
Land Pattern (recommended) (mm)
[6]
Revised June 9, 2010

Related parts for SiT8102AC-13-33E-100.00000X