SiT8102AI-43-33E-100.00000 SiTime, SiT8102AI-43-33E-100.00000 Datasheet - Page 2

• Manufacturer Part Number: SiT8102AI-43-33E-100.00000
• Description: Programmable Oscillators 100MHz +/-50ppm 3.3V +/-10%
• Manufacturer: SiTime

Specifications of SiT8102AI-43-33E-100.00000

• Product Category: Programmable Oscillators
• Rohs: yes
• Package / Case: QFN EP
• Frequency: 100 MHz
• Frequency Stability: 50 PPM
• Supply Voltage: 3.3 V
• Load Capacitance: 15 pF
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Product: Programmable
• Supply Voltage - Max: 3.63 V
• Supply Voltage - Min: 2.97 V

Description
The SiT8102 is the next generation of the SiT8002 program-
mable oscillator with lower phase noise, lower jitter, and a
higher frequency range. SiTime oscillators are the smallest,
high-performance programmable oscillator available and are
suitable for use in high speed serial communications,
consumer, portable, industrial, automotive and computation.
This oscillator is packaged in standard low-cost plastic and
chip-scale IC packages.
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings of the part may cause permanent damage to the part. Actual
performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
Ab
Operating Conditions
Environmental Compliance
Notes:
SiT8102
Storage Temperature
VDD
Electrostatic Discharge
Theta JA ( with copper plane on VDD and GND)
Theta JC (with PCB traces of 0.010 inch to all pins)
Soldering Temperature (follow standard Pb free soldering guidelines)
Number of Program Writes
Program Retention over -40 to 125 °C, Process, VDD (0 to 3.65V)
Supply Voltages, VDD
Extended Commercial OperatingTemperature
Industrial Operating Temperature
Maximum Load Capacitance
Mechanical Shock
Mechanical Vibration
Temperature Cycle
Solderability
Moisture Sensibility Level
1. The 2.5V device can operate from 2.25V to 3.63V with higher output drive, however, the data sheet specifications cannot be guaranteed. Please contact factory
2. The output driver strength can be programmed to drive up to 30pF load. Please contact factory for this option.
Parameter
Parameter
Parameter
for this option.
solute Maximum Table
[1]
[2]
MIL-STD-883F, Method 2002
MIL-STD-883F, Method 2007
JESD22, Method A104
MIL-STD-883F, Method 2003
MSL1 @ 260°C
Condition/Test Method
Page 2 of 7
System reliability is also increased with the SiT8102 by elimi-
nating the quartz crystal and improved immunity to the
environmental effects of vibration, shock, strain, and humidity.
To order samples, go to www.sitime.com and click on Request
Sample” link.
Min.
2.97
2.25
2.52
1.7
-20
-40
–
Min.
Typ.
-0.5
-65
3.3
2.5
2.8
1.8
–
–
–
–
–
–
–
–
–
1,000+
+3.65
6000
Max.
Max.
3.63
2.75
3.08
150
260
1.9
75
24
70
85
15
1
years
°C/W
°C/W
Unit
Unit
NA
°C
°C
°C
°C
pF
V
V
V
V
V
V