WIZ610wi WIZnet, WIZ610wi Datasheet - Page 21

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

2.2.4 Network Setting
You can configure network parameters of WIZ610wi.
range must be
DHCP Client
select “Disable”.
list of clients.
assigned in order for the clients to connect. If the DHCP server function is disabled, this
Range is not activated.
Notice:
upper layer, the DHCP function in your wireless module will be disabled. All your clients
connecting to your WIZ610wi can not recognize your module as a DHCP server.
Show Client : If you click the “Show Client” button, a window is popped up to show a
IP Address: The default IP Address is set as “192.168.1.254”.
Subnet Mask: The default Subnet Mask is set as “255.255.255.0”.
Default Gateway: The default Gateway is set as “0.0.0.0”.
DHCP: If you want to activate the DHCP Server function, select the “Server”. If not,
DHCP Client Range: When WIZ610wi operates as the DHCP Server, the IP address
When the WIZ610wi’s IP address is managed by another DHCP server in the
Figure 10. Network Setting
13