WIZ610wi WIZnet, WIZ610wi Datasheet - Page 32

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

2.2.5.4. Gateway Setup
<Notice>
When changed to Gateway mode, wired network is disconnected, It because WIZ610wi’s
wire port act as WAN Port. So to solve this problem..
1. Connect WIZ610wi through wireless
2. Check WAN IP of Gateway mode setup page
3. Connect ‘http://WAN_IPaddress:8080 (8080 port)
First time it must be input ‘8080’, but next time no need to add ‘8080’
Gateway mode can be used when you want to connect to the Internet through an
ADSL/Cable Modem, or IP Sharing Device. By clicking the “Setup” button, you can configure
your PPPoE, DHCP Client, PPTP or Static IP settings
Figure 23. Gateway Setup
Alias Name: Refer to “2.2.4.3 Access Point Setup”.
Band: Refer to “2.2.4.3 Access Point Setup”.
24