WIZ610wi WIZnet, WIZ610wi Datasheet - Page 37

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

2.2.6. Serial Setting
For the ‘Serial to Wireless’ communication, you can configure serial parameters.
This mode is to select the communication method based on TCP. TCP is the protocol which
establishes the connection before data communication. In server mode, WIZ610wi waits for
the connection from a client. In client mode, WIZ610wi operates as client at the TCP Client
mode on the process of connection, and tries to connect to the server’s IP and Port. Mixed
modes supports both of Server and Client at the same time.
Below describes in details regarding each mode
Status: Check this combo box to enable serial communication
Protocol: Select UDP or TCP
Mode: Select one mode among Server, Client and Mixed.
Figure 30. Serial to Ethernet Configuration
29