WizFi210 WIZnet, WizFi210 Datasheet - Page 38

no-image

WizFi210

Manufacturer Part Number
WizFi210
Description
WiFi / 802.11 Modules 802.11B WIFI MOD LOW POWER
Manufacturer
WIZnet
Datasheet

Specifications of WizFi210

Rohs
yes
Protocol Supported
802.11 b/g/n
Frequency Band
2.4 GHz
Data Rate
11 Mbps
Interface Type
I2C, SPI, UART
Transmit Power (max)
8 dBm
Antenna Connector Type
U.FL
Operating Supply Voltage
3.3 V
Supply Current Transmitting
135 mA
Supply Current Receiving
125 mA
Maximum Operating Temperature
+ 85 C
Dimensions
32 mm x 23.5 mm x 3 mm
Minimum Operating Temperature
- 40 C
Modulation Technique
CCK, DSSS
Security
WEP, WPA, WPA2
ATC
ATA
ATA2
ATO
AT+XAR=
Command
AT+WEBPROV
=
AT+WEBLOGO
ADD=
Command
AT+FWUP=
AT+SETTIME=
AT+
GETTIME=?
AT+DGPIO=
WizFi 210 User Manual
(12) Provisioning
(13) Miscellaneous
n=0 (disable) =1 (enable)
n=0 (disable)
Parameters
<user name>,<passwd>
<size> maximum size is 1788
bytes
Parameters
<SrvIp>,<SrvPort>,<SrcPort>,[<ret
ry>]
<dd/mm/yyyy>,<HH:MM:SS>
<GPIO-NO>,<SET/RESET(0/1)>
5 to 3600 (interval, seconds)
(WIZnet Co., Ltd.)
Table 25. Auto connection
Table 26. Provisioning
Ex) AT+NAUTO=0,1,192.168.3.101,5000
(TCP/Client)
IF 1, Auto Connect is enabled on next reboot
or AT.
Start Auto Connect, including association.
Start Auto Connect using existing association.
Return to a previous Auto Connect session;
returns an error if no such session exists.
Auto reconnect interval.
Ex) AT+XAR=0, AT+XAR=10
Responses / Effects
Provisioning through web pages
Adding the Logo that will appear on the web
pages used for provisioning.
Responses / Effects
Get a firmware upgrade from the server
address/port to the adapter port SrcPort.
Ex) AT+FWUP=192.168.3.200,667,667
Set the adaptor system time
Upon reception of this command the adaptor
sends the current system time in milliseconds
since
epoch(1970) to the serial interface. The time
format comes on the serial interface as
follows:
“Current Time in msec since epoch=xxxxxxx”
Set or reset (high/low) a GPIO pin
Ex) AT+DGPIO=31,0
AT+NAUTO=1,1, ,5001 (TCP/Server)
AT+NAUTO=0,0,192.168.3.101,5002
(UDP, Local/Remote Port is 5002)
32

Related parts for WizFi210