W5100 WIZnet, W5100 Datasheet - Page 46

• Manufacturer Part Number: W5100
• Description: Ethernet ICs 3-IN-1 ENET CONTR TCP/IP+MAC+PHY
• Manufacturer: WIZnet

Specifications of W5100

• Rohs: yes
• Product: Ethernet Controllers
• Data Rate: 10 Mb/s, 100 Mb/s
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 3 V
• Maximum Operating Temperature: + 80 C
• Package / Case: LQFP-80
• Ethernet Connection Type: 10Base-T, 100Base-TX
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Standard Supported: 802.3, 802.3u

© Copyright 2009-2010 WIZnet Co., Inc. All rights reserved.
}
First method :
{
}
Second method :
{
}
{
}
}
else
{
}
/* increase Sn_TX_WR as length of send_size */
Sn_TX_WR += send_size;
/* set SEND command */
Sn_CR = SEND;
If (Sn_IR(DISCON bit) == „1‟) goto CLOSED stage;
/* In this case, if the interrupt of Socket n is activated, interrupt occurs. Refer to
If (Sn_SR == SOCK_CLOSE_WAIT) goto CLOSED stage;
/* set DISCON command */
Sn_CR = DISCON;

Waiting for a connection termination request from remote peer.
It can be checked as below if it received connection termination request of remote peer.

Check if user requests to terminate this connection.
To terminate the connection, proceed as below,
Interrupt Register(IR), Interrupt Mask Register (IMR) and Socket n Interrupt Register
(Sn_IR). */
memcpy(source_addr, gSn_TX_BASE, left_size);
/* copy send_size bytes of source_addr to get_start_address */
memcpy(source_addr, get_start_address, send_size);
ESTABLISHED : Received FIN?
ESTABLISHED : Disconnect ? / Disconnecting Process
46