W3150A+ WIZnet, W3150A+ Datasheet - Page 30

• Manufacturer Part Number: W3150A+
• Description: Ethernet ICs ENET CONTR TCP/IP+MAC
• Manufacturer: WIZnet

Specifications of W3150A+

• Rohs: yes
• Product: Ethernet Transceivers
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 3 V
• Maximum Operating Temperature: + 80 C
• Package / Case: LQFP-64
• Ethernet Connection Type: 10Base-T, 100Base-TX
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT

0x00
0x13
0x14
0x17
0x1C
0x22
0x32
0x42
0x5F
Below is shown during changing the status.
0x15
0x16
0x18
0x1A
0X1B
0X1D
0x11
0x21
0x31
Value
Value
SOCK_CLOSED
SOCK_INIT
SOCK_LISTEN
SOCK_ESTABLISHED
SOCK_CLOSE_WAIT
SOCK_UDP
SOCK_IPRAW
SOCK_MACRAW
SOCK_PPPOE
SOCK_SYNSENT
SOCK_SYNRECV
SOCK_FIN_WAIT
SOCK_CLOSING
SOCK_TIME_WAIT
SOCK_LAST_ACK
SOCK_ARP
Symbol
Symbol
© Copyright 2006 WIZnet Co., Inc. All rights reserved.
It is shown in case that CLOSE commands are given to Sn_CR, and
Timeout interrupt is asserted or connection is terminated.
It is shown in case that Sn_MR is set as TCP and OPEN commands are
given to Sn_CR.
It is shown in case that LISTEN commands are given to Sn_CR at the
SOCK_INIT status
It is shown in case that connection is established.
It is shown in case that connection termination request is received
peer
It is shown in case that OPEN commands are given to Sn_CR when Sn_MR
is set as UDP.
It is shown in case that OPEN commands are given to Sn_CR when Sn_MR
is set as IPRAW.
It is shown in case that OPEN commands are given to S0_CR when S0_MR
is set as MACRAW.
It is shown in case that OPEN commands are given to S0_CR when S0_MR
is set as PPPoE.
It is shown in case that CONNECT commands are given to Socket n
Command Register(Sn_CR) at the SOCK_INIT status. It is automatically
changed to SOCK_ESTABLISH when the connection is established.
It is shown in case that connection request is received from remote
peer(CLIENT). It normally responds to the requests and changes to
SOCK_ESTABLISH.
It is shown in the process of connection termination. If the termination
is normally processed or Timeout interrupt is asserted, it will be
automatically changed to SOCK_CLOSED.
It is shown when ARP Request is sent in order to acquire Hardware
Address of remote peer when it sends connection request in TCP mode
or sends data in UDP mode. If ARP Reply is received, it changes to the
status, SOCK_SYNSENT, SOCK_UDP or SOCK_ICMP, for the next operation.
host.
- 29 -
Description
Description
from