24C01C/P Microchip Technology, 24C01C/P Datasheet

no-image

24C01C/P

Manufacturer Part Number
24C01C/P
Description
IC EEPROM 1KBIT 400KHZ 8DIP
Manufacturer
Microchip Technology
Datasheets

Specifications of 24C01C/P

Memory Size
1K (128 x 8)
Package / Case
8-DIP (0.300", 7.62mm)
Operating Temperature
0°C ~ 70°C
Format - Memory
EEPROMs - Serial
Memory Type
EEPROM
Speed
400kHz
Interface
I²C, 2-Wire Serial
Voltage - Supply
4.5 V ~ 5.5 V
Organization
128 K x 8
Interface Type
I2C
Maximum Clock Frequency
0.4 MHz
Access Time
900 ns
Supply Voltage (max)
5.5 V
Supply Voltage (min)
4.5 V
Maximum Operating Current
3 mA
Maximum Operating Temperature
+ 70 C
Mounting Style
Through Hole
Minimum Operating Temperature
0 C
Operating Supply Voltage
5 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
24C01C/P
Manufacturer:
MCP
Quantity:
2 263
Part Number:
24C01C/P
Manufacturer:
MICROCHI
Quantity:
20 000
Features:
• Single Supply with Operation from 4.5V to 5.5V
• Low-Power CMOS Technology:
• 2-Wire Serial Interface, I
• Cascadable up to Eight Devices
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz and 400 kHz Clock Compatibility
• Page Write Time 1 ms max.
• Self-Timed Erase/Write Cycle
• 16-Byte Page Write Buffer
• ESD Protection >4000V
• More than 1 Million Erase/Write Cycles
• Data Retention >200 Years
• Factory Programming Available
• Packages include 8-lead PDIP, SOIC, TSSOP,
• Pb-Free and RoHS Compliant
• Temperature Ranges:
Package Types
© 2008 Microchip Technology Inc.
- Read current 1 mA, max.
- Standby current 5 μA, max.
DFN, TDFN and MSOP
- Industrial (I):
- Automotive (E):
V
A0
A1
A2
SS
1
2
3
4
PDIP, MSOP
8
7
6
5
2
-40°C to +85°C
-40°C to +125°C
C™ Compatible
1K 5.0V I
V
Test
SCL
SDA
CC
2
C
V
A0
A1
A2
SS
SOIC, TSSOP
1
2
3
4
Serial EEPROM
Description:
The Microchip Technology Inc. 24C01C is a 1K bit
Serial Electrically Erasable PROM with a voltage range
of 4.5V to 5.5V. The device is organized as a single
block of 128 x 8-bit memory with a 2-wire serial
interface. Low-current design permits operation with
max. standby and active currents of only 5 μA and 1
mA, respectively. The device has a page write capabil-
ity for up to 16 bytes of data and has fast write cycle
times of only 1 ms for both byte and page writes. Func-
tional address lines allow the connection of up to eight
24C01C devices on the same bus for up to 8K bits of
contiguous EEPROM memory. The device is available
in the standard 8-pin PDIP, 8-pin SOIC (3.90 mm),
8-pin 2x3 DFN and TDFN, 8-pin MSOP and TSSOP
packages.
Block Diagram
8
7
6
5
SDA SCL
A0 A1 A2
Control
Logic
V
I/O
V
CC
SS
V
Test
SCL
SDA
CC
Memory
Control
Logic
24C01C
V
A2
A0
A1
SS
XDEC
1
4
2
3
DFN/TDFN
HV Generator
8
7
6
5
DS21201J-page 1
Sense Amp.
R/W Control
V
Test
SCL
SDA
EEPROM
YDEC
CC
Array

Related parts for 24C01C/P

24C01C/P Summary of contents

Page 1

... C Serial EEPROM Description: The Microchip Technology Inc. 24C01C bit Serial Electrically Erasable PROM with a voltage range of 4.5V to 5.5V. The device is organized as a single block of 128 x 8-bit memory with a 2-wire serial interface. Low-current design permits operation with max. standby and active currents of only 5 μA and 1 mA, respectively ...

Page 2

... V (Note) CC — 0. μA — ± μA — ±1 V OUT — 25° MHz A — — μA — +1. -40°C to +85° -40°C to +125°C A Conditions = 3 4. 5.0V (Note) = 5.5V, SCL = 400 kHz = 5.5V = 5.5V, SDA = SCL = © 2008 Microchip Technology Inc. ...

Page 3

... This eliminates the need for This parameter is not tested but ensured by characterization. For endurance estimates in a specific application, please consult the Total Endurance™ Model, which can be obtained from Microchip’s web site at www.microchip.com. © 2008 Microchip Technology Inc. Electrical Characteristics: Industrial (I +4.5V to 5.5V ...

Page 4

... FIGURE 1-1: BUS TIMING DATA 5 SCL 7 3 SDA SDA OUT DS21201J-page © 2008 Microchip Technology Inc. ...

Page 5

... V is below 3.8 volts at nominal conditions. The SCL and SDA inputs have Schmitt Trigger and filter circuits which suppress noise spikes to assure proper device operation even on a noisy bus. © 2008 Microchip Technology Inc. 8-pin 8-pin 8-pin TSSOP ...

Page 6

... A master must signal an end of data to the slave by not generating an Acknowledge bit on the last byte that has been clocked out of the slave. In this case, the slave must leave the data line high to enable the master to generate the Stop condition (Figure 4-2) © 2008 Microchip Technology Inc. ...

Page 7

... SCL SDA Data from transmitter Transmitter must release the SDA line at this point allowing the Receiver to pull the SDA line low to acknowledge the previous eight bits of data. © 2008 Microchip Technology Inc. (C) (D) Address or Data Acknowledge Allowed Valid to Change Acknowledge Bit ...

Page 8

... In this case, software can use A0 of the control byte as address bit A8 address bit A9, and A2 as address bit A10 not possible to write or read across device boundaries. © 2008 Microchip Technology Inc. R/W ACK ...

Page 9

... T SDA Line S Bus Activity © 2008 Microchip Technology Inc. After the receipt of each word, the four lower order Address Pointer bits are internally incremented by one. The higher order four bits of the word address remains constant. If the master should transmit more than 16 ...

Page 10

... Read or Write command. See Figure 7-1 for flow diagram. DS21201J-page 10 FIGURE 7-1: ACKNOWLEDGE POLLING FLOW Send Write Command Send Stop Condition to Initiate Write Cycle Send Start Send Control Byte with R Did Device Acknowledge (ACK = 0)? YES Next Operation © 2008 Microchip Technology Inc. ...

Page 11

... Byte SDA Line Bus Activity © 2008 Microchip Technology Inc. 8.2 Random Read Random read operations allow the master to access any memory location in a random manner. To perform this type of read operation, first the word address must be set. This is done by sending the word address to the 24C01C as part of a write operation ...

Page 12

... MSOP XXXXT YWWNNN 8-Lead 2x3 DFN XXX YWW NN 8-Lead 2x3 TDFN XXX YWW NN DS21201J-page 12 Example: 24C01C e I/P 13F 3 0527 Example: 24C01CI 0527 13F Example: 4C1C I527 13F Example: 4C1CI 52713F Example: 2N7 527 13 Example: AN7 527 13 © 2008 Microchip Technology Inc. ...

Page 13

... Note: Please visit www.microchip.com/Pbfree for the latest information on Pb-free conversion. *Standard OTP marking consists of Microchip part number, year code, week code, and traceability code. © 2008 Microchip Technology Inc. 1st Line Marking Codes DFN MSOP I Temp. ...

Page 14

... DS21201J-page 14 © 2008 Microchip Technology Inc. ...

Page 15

... Microchip Technology Inc. α φ β 24C01C DS21201J-page 15 ...

Page 16

... DS21201J-page 16 © 2008 Microchip Technology Inc. ...

Page 17

... Microchip Technology Inc. φ I 24C01C DS21201J-page 17 ...

Page 18

... DS21201J-page 18 I © 2008 Microchip Technology Inc. φ ...

Page 19

... Microchip Technology Inc. 24C01C DS21201J-page 19 ...

Page 20

... DS21201J-page 20 © 2008 Microchip Technology Inc. ...

Page 21

... Microchip Technology Inc. 24C01C DS21201J-page 21 ...

Page 22

... DS21201J-page 22 © 2008 Microchip Technology Inc. ...

Page 23

... Revision H (04/2008) Replaced Package Drawings; Added TDFN package; Revised Product ID section. Revision J (08/2008) Updated Features Section; Added Table 2-1 Pin Function Table; Corrections to Table 1-1, DC Charac- teristics; Updated Table 1-2, AC Characteristics; Updated Package Drawings. © 2008 Microchip Technology Inc. 24C01C DS21201J-page 23 ...

Page 24

... NOTES: DS21201J-page 24 © 2008 Microchip Technology Inc. ...

Page 25

... To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions. © 2008 Microchip Technology Inc. CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: • Distributor or Representative • ...

Page 26

... What deletions from the document could be made without affecting the overall usefulness there any incorrect or misleading information (what and where)? 7. How would you improve this document? DS21201J-page 26 Total Pages Sent ________ FAX: (______) _________ - _________ N Literature Number: DS21201J © 2008 Microchip Technology Inc. ...

Page 27

... Plastic Micro Small Outline (MSOP), 8-lead MC = Plastice Dual Flat (DFN), No lead, 2x3 mm body, 8-lead (1) MNY = Plastic Dual Flat (TDFN), No lead package, 2x3 mm body, 8-lead Note 1: “Y” indicates a Nickel, Palladium, Gold (NiPdAu) finish. © 2008 Microchip Technology Inc. 24C01C . Examples: a) 24C01C-I/P: Industrial Temperature, PDIP Package ...

Page 28

... NOTES: DS21201J-page 28 © 2008 Microchip Technology Inc. ...

Page 29

... PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Total Endurance, UNI/O, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 30

... Fax: 886-3-572-6459 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 © 2008 Microchip Technology Inc. EUROPE Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Tel: 33-1-69-53-63-20 ...

Related keywords