EVAL-AD9832SDZ Analog Devices, EVAL-AD9832SDZ Datasheet - Page 4

• Manufacturer Part Number: EVAL-AD9832SDZ
• Description: Data Conversion IC Development Tools EVALUATION BOARD I.C.
• Manufacturer: Analog Devices
• Type: DACr
• Series: AD9832r

Specifications of EVAL-AD9832SDZ

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: AD9832
• Interface Type: USB
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Factory Pack Quantity: 1
• For Use With: EVAL-SDP-CB1Z

UG-313
RUNNING THE SOFTWARE
To run the evaluation board program, do the following:
1.
2.
3.
Click Start/All Programs/Analog Devices/AD9832/
AD9832 Eval Board.
If the SDP board is not connected to the USB port when
the software is launched, a connectivity error displays (see
Figure 3). Simply connect the evaluation board to the USB
port of the PC, wait a few seconds, click Rescan, and follow
the instructions.
Ensure that all links are in their correct locations (see Table 1).
The main window of the
opens, as shown in Figure 4.
Figure 3. Pop-Up Window Error
AD9832
evaluation software then
Rev. 0 | Page 4 of 12
Table 1. Default Setup for Link Positions
Link No.
LK1
LK3
LK5
LK6
Position
Connected
B
B
A
Evaluation Board User Guide
Function
REFOUT is used as the reference to the
DAC by connecting REFOUT to REFIN
3.3 V digital supply for the
supplied from the
board.
3.3 V analog supply for the
supplied from the EVAL-SDP-CB1Z
board.
On-board linear regulator selected to
supply power to the general oscillator.
EVAL-SDP-CB1Z
AD9832
AD9832