conga-MCB/Qseven congatec, conga-MCB/Qseven Datasheet - Page 7

• Manufacturer Part Number: conga-MCB/Qseven
• Description: Development Boards & Kits - x86 MINI-CARRIER BOARD FOR QSEVEN
• Manufacturer: congatec

Specifications of conga-MCB/Qseven

• Rohs: yes
• Product: Qseven Mini Carrier Boards
• Form Factor: Qseven
• Tool Is For Evaluation Of: Qseven Modules
• Core: Intel Atom
• Interface Type: CAN, Ethernet, I2C, PCI, SATA, USB
• Operating Supply Voltage: 9 V to 20 V
• Description/function: conga-MCB Qseven is a full featured, miniaturized carrier board for Qseven modules
• Dimensions: 140 mm x 95 mm
• Maximum Operating Temperature: + 60 C
• Minimum Operating Temperature: 0 C
• Part # Aliases: 20730
• For Use With: Qseven Modules

1
Copyright © 2012 congatec AG
Introduction
The conga-MCB/Qseven is a Qseven
from 9V up to 20V, as well as 5V STB and therefore can be used as a stand-alone carrier board for Qseven
use the conga-MCB/Qseven as a small evaluation platform for your battery supported application using Qseven
integrated into an application.
Information about the cables required to operate the conga-MCB/Qseven mini carrier board can be found in section 6 “Cables” of this document.
Note
conga-MCB/Qseven Features
Qseven
1x PCI Express mini Card socket specification rev. 1.2 (bottom side)
Gigabit Ethernet connector with LEDs on front panel
1x CFast socket or 1x horizontal SATA connector (bottom side)
1x vertical SATA connector + 1x power JST PH header
1x 8bit SD Card socket (bottom side)
2x USB on front panel, 4x USB on 2 internal 2x5 pin 2.54 USB headers
1x HDMI or DisplayPort connector on front panel (output is module dependent)
LVDS – Single/Dual 18/24bits 40pins 1mm Hirose connector and 4pins Backlight JST PH connector.
Audio – 2x 3.5“ Jack on front panel; 2x3pins 2.54 SPDIF I/O internal header
1x SPI on 2x5 pin 2.54 header
1x CAN on 5 pin connector
PC Beep Speaker
APIX2 extension on 45 pin 0.5mm FFC connector as option
FAN – 1x controlled standard 3 pin FAN connector
5 pin power connector for wide input voltage range, 8 pin connector for conga battery module, 2 pin connector for control of
an ATX power supply unit.
Feature connector for Power, Reset, Sleep, and LID button, LED indicators, mini card Wifi radio On/Off
®
Specification rev. 1.20 compilant
®
module mini carrier board. It has an industrial 5 pin power connector with an input voltage allowance
QMCBm10
®
®
modules. It’s also possible to
modules or it can be directly
7/34