MAX1308EVB16 Maxim Integrated, MAX1308EVB16 Datasheet - Page 2

• Manufacturer Part Number: MAX1308EVB16
• Description: Data Conversion IC Development Tools MAX1308 Evaluation Kit/Evaluation System
• Manufacturer: Maxim Integrated
• Series: MAX1304, MAX1305, MAX1306, MAX1308, MAX1309, MAX1310, MAX1312, MAX1313, MAX1314r

Specifications of MAX1308EVB16

• Interface Type: SPI

• MAX1308EVB16 EV system (MAX1308 EV kit,
• Three power supplies:
• Waveform generator (optional)
• Digital voltmeter (DVM)
• User-supplied 9-pin serial extension cable
• User-supplied Windows 2000/XP PC with an avail-
• USB cable included with the USBTO232
• Logic analyzer (optional)
MAX1308 Evaluation Kit/Evaluation System
Note: Indicate you are using the MAX1308 when contacting
these component suppliers.
2
Murata
TDK
HELPFILE.HTM
MAX1308.ASM
MAX1308.EXE
MAX1308.C16
SUPPLIER
68HC16MOD-16WIDE µC module, and USBTO232)
able USB port
INSTALL.EXE
Recommended Equipment—USB Port PC
EVKIT2.ASM
_______________________________________________________________________________________
UNINST.INI
QSPI.ASM
GPT.ASM
1) 7V or higher (up to 20V) at 300mA for the
2) 5V at 250mA for AVDD
3) ±5.5V at 250mA for HVAVCC and HVAVEE
FILE
68HC16MOD-16WIDE
(or ±10V at 250mA to evaluate the
MAX1312ECM–MAX1315ECM)
770-436-1300
847-803-6100
Installs the EV kit files on your computer
Application program
68HC16MOD-16WIDE software
MAX1308 EV kit help file
Uninstalls the EV kit software
68HC16MOD-16WIDE µC source file
68HC16MOD-16WIDE µC source file
68HC16MOD-16WIDE µC source file
68HC16MOD-16WIDE µC source file
PHONE
MAX1308 EV Kit Files
Component Suppliers
DESCRIPTION
www.murata.com
www.component.tdk.com
Connection Option
Quick Start
WEBSITE
Caution: Do not turn on the power until all connec-
tions are completed.
1) Visit the Maxim website (www.maxim-ic.com/evkit-
2) Set JU1 to 1-2 (selects midscale reference for bi-
3) Set JU2 to 1-2 (selects on-board external reference).
4) Remove the shunt from JU3 (disables auto-
5) Set JU4 to 1-2 (enables the MAX1308 internal clock).
6) Set JU5–JU12 to 1-2 (selects buffered input for chan-
7) Set JU13 to 2-3 (selects midscale reference for bi-
8) Set JU14 to 1-2 (enables the MAX1308 inter-
9) Set JU15 to 2-3 (selects VCC from 68HC16MOD-
10) Set JU16 to 2-3 (selects HVAVCC pad as positive
11) Connect the MAX1308 EV kit’s two 40-pin female
12) Connect the USBTO232 board to the 68HC16MOD-
13) The MAX5734 EV kit software should have already
14) Connect the +5V power supply between the
15) Connect the ±5.5V power supply to the MAX1308 EV
16) Connect the 7V (up to 20V supported) power supply
17) Turn on all three power supplies.
18) Turn on the 68HC16MOD-16WIDE by setting SW1 to
19) Measure the voltage at REF using the DVM and verify
20) Start the MAX1308 EV kit software by double-clicking
software) to download the latest version of the
USBTO232 user guide. Follow the steps in the
USBTO232 user guide Quick Start section and return
to step 2 of this Quick Start section when finished.
polar operation).
read feature).
nel 0 through channel 7).
polar operation).
nal clock).
16WIDE as DVDD).
supply for input buffers).
connectors (J3 and J4) to the 68HC16MOD-16WIDE
module’s two 40-pin male connectors (P1 and P2).
ULE-DIP module if you have not done so already.
been downloaded and installed in the USBTO232
Quick Start.
MAX1308 EV kit’s AVDD and AGND pads.
kit (+5.5V to HVAVCC pad, ground to AGND pad,
and -5.5V to HVAVEE pad).
to the 68HC16MOD-16WIDE’s power connector (J2).
the ON position.
that the voltage is 2.500V ±0.025V.
its icon in the Start | Programs menu.
Procedure