WIZ100SR-EVB

Manufacturer Part NumberWIZ100SR-EVB
DescriptionInterface Development Tools EVALUATION BOARD FOR WIZ100SR
ManufacturerWIZnet
TypeSerial to Ethernet
WIZ100SR-EVB datasheet
 


Specifications of WIZ100SR-EVB

RohsyesProductEvaluation Boards
Tool Is For Evaluation OfWIZ100SRInterface TypeEthernet, RS-232
Operating Supply Voltage5 VDimensions50 mm x 30 mm x 8.85 mm
Maximum Operating Temperature+ 80 CMinimum Operating Temperature+ 10 C
Operating Supply Current500 mA  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Page 1/42

Download datasheet (2Mb)Embed
Next
WIZ100SR User‟s Manual
(Version 2.0)
© 2008 WIZnet Co., Inc. All Rights Reserved.
☞ For more information, visit our website at
http://www.wiznet.co.kr
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
1

WIZ100SR-EVB Summary of contents

  • Page 1

    ... WIZ100SR User‟s Manual © 2008 WIZnet Co., Inc. All Rights Reserved. ☞ For more information, visit our website at Hardwired Internet Connectivity Wizard (WIZnet, Inc.) (Version 2.0) http://www.wiznet.co.kr 1 ...

  • Page 2

    ... WIZnet‟s Online Technical Support If you have something to ask about WIZnet products, write down your question on Q&A Board in WIZnet website (www.wiznet.co.kr). WIZnet will give an answer as soon as possible Hardwired Internet Connectivity Wizard (WIZnet, Inc.) 2 ...

  • Page 3

    ... COPYRIGHT NOTICE Copyright 2008 WIZnet, Inc. All Rights Reserved. Technical Support: support@wiznet.co.kr Sales & Distribution: sales@wiznet.co.kr For more information, visit our website at Hardwired Internet Connectivity Wizard (WIZnet, Inc.) http://www.wiznet.co.kr 3 ...

  • Page 4

    ... Getting Started ......................................................................................... 13 2. Hardware Installation Procedure......................................................... 13 2.1. Configuration Tool .......................................................................... 14 2.2. Firmware Upload ....................................................................................... 24 3. Serial Configuration .................................................................................... 26 4. Serial Command Format .................................................................. 26 4.1. WIZ100SR Configuration with Serial Command ...................................... 29 4.2. Hardware Configuration ............................................................................... 31 5. Frame Format ............................................................................... 31 5.1. Hardware Configuration Examples ...................................................... 33 5.2. PIN Assignment and Dimenstion .................................................................... 34 6. Demonstration and Test ............................................................................... 36 7. Reference Schematic ................................................................................. 41 8 ...

  • Page 5

    ... C U .......................................................................................................... 25 IGURE OMPLETE PLOADING F 16 IGURE ERIAL ONFIGURATION F 17 IGURE ERIAL ONFIGURATION F 18. WIZ100SR P A IGURE IN SSIGNMENT F 19. WIZ100SR B D IGURE OARD IMENSION F 20 ->E IGURE ATA LOW ERIAL F 21 IGURE ATA LOW THERNET F 22 IGURE ...

  • Page 6

    ... ONFIGURATION T 12 ABLE ARDWARE ONFIGURATION T 13 ABLE ARDWARE ONFIGURATION T 14 ABLE ARDWARE ONFIGURATION T 15. WIZ100SR PIN F ABLE UNCTIONS T 16. WIZ100SR B D ABLE OARD IMENSION Hardwired Internet Connectivity Wizard (WIZnet, Inc.) Tables .......................................................................................... 9 .................................................................................. 26 F ....................................................................... 26 EPLY RAME FORMAT C ....................................................................................... 26 EPLY ...

  • Page 7

    ... Ethernet and TCP/IP by connecting to the existing equipment with RS-232 serial interface. In other words, WIZ100SR is a protocol converter that transmits the data sent by serial equipment as TCP/IP data type and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment 1 ...

  • Page 8

    ... Products Contents (EVB model) Hardwired Internet Connectivity Wizard (WIZnet, Inc.) WIZ100SR Module WIZ100SR Test Board (to connect Serial device and Test board) (Crossover Cable) (DC 5V 500mA Adaptor) (including Manual, H/W Schematic, and S/W) Table 1. Products Contents Serial Cable Network Cable Power CD 8 ...

  • Page 9

    ... Software Serial Transmission Speed Memory Temperature Humidity Power Connector type Size Table 2. WIZ100SR Module Specification Hardwired Internet Connectivity Wizard (WIZnet, Inc.) Specification TCP, UDP, IP, ARP, ICMP, IGMP, MAC, DHCP, PPPoE, DNS 10/100 Base-T Ethernet (Auto detection) 1 RS-232 port (3.3V LVTTL) 8051 compatible 8-N-1, 8-O-1, 8-E-1, 7-O-1, 7-E-1 ...

  • Page 10

    ... For the function test, set it as Normal mode.  If LED(D5) is on, it indicates that network is connected or Config mode is set. Hardwired Internet Connectivity Wizard (WIZnet, Inc.) WIZ100SR Module Reset Switch Figure 1. WIZ100SR Test Board Mode Switch Normal/Config RS232 Connector ...

  • Page 11

    ... Serial Interface Figure 2. Serial Pin Assignment of WIZ100SR Test Board Pin Number Table 3. Serial Pin Description RxD, TxD, GND : These are all you need if the device does not use hardware handshaking.  RxD, TxD, GND, RTS, CTS : These are the signals used when serial device uses hardware  ...

  • Page 12

    ... LED  Power LED: displays power stauts of WIZ100SR  Link LED: indicates network link is established  10 LED: indicates network speed is 10Mbps  100 LED: indicates network speed is 100Mbps  Collision LED: indicates a packet transmitted from the Ethernet controller to the network has collied with antother packet Hardwired Internet Connectivity Wizard (WIZnet, Inc ...

  • Page 13

    ... STEP2: Connect the RJ-45 connector of WIZ100SR test board to the Ethernet hub  or LAN port of PC. STEP3: Connect the DB9 jack of WIZ100SR and serial device with RS-232 serial line.  STEP4:  Connect the 5V (500mA) DC power adaptor to the WIZ100SR test board. The power used fo WIZ100SR is 3.3V. ...

  • Page 14

    ... Board List : If you click “Search” button, all the MAC addresses on a same subnet, will be displayed. ⓓ IP Configuration Method: Select IP setting mode, you can select one of Static, DHCP, PPPoE mode. - Static: “Static” is option for setting WIZ100SR IP with static IP address. Firstly, select MAC Hardwired Internet Connectivity Wizard (WIZnet, Inc.) ⓓ ⓔ ...

  • Page 15

    ... If module could not acquire network information from DHCP server, IP address, Gateway Address and Subnet mask will be initialized to 0.0.0.0. - PPPoE : WIZ100SR supports PPPoE for ADSL user. When you select PPPoE at the “IP Configuration Method”, PPPoE ID & Password box is enabled set PPPoE, connect PC to WIZ100SR directly and execute Configuration Tool program on PC. (Configuration Tool Version should be 2.1 or above) 2. Select „ ...

  • Page 16

    ... PPPoE ID/Password : If you select „PPPoE‟ mode, input ID/Password which you received from ISP company. ⓘ Server IP/Port : When WIZ100SR is set as “Client mode” or Mixed mode”, server IP and port should be set. WIZ100SR attempts to connect this IP address. ⓙ Network mode: client/server/mixed : This is to select the communication method based on TCP ...

  • Page 17

    ... In TCP Client mode, WIZ100SR can actively establish a TCP connection to a host computer when power is supplied. As illustrated in the above figure, data transmission proceeds as follows power is supplied, WIZ100SR board operating as TCP client mode actively establishes a connection to the server the connection is complete, data can be transmitted in both directions – from the host to the WIZ100SR and from WIZ100SR to the host < ...

  • Page 18

    ... As like TCP Server mode, the Mixed mode is useful for the case that the monitoring center tries to connect to the serial device (in which WIZ100SR is used) to check device status. In addition to this, if any emergency occurs in the serial device, the module will change to Client mode to establish the connection to the server and deliver the emergency status of the device. ⓚ ...

  • Page 19

    ... The module will be initialized to the changed values (re-booting is processed) ⑤ To check configuration result, click „Search‟ button. ⓟ Upload Firmware will be uploaded through network ☞ After uploading the firmware, 20~30 seconds are required for initialization. ⓠ Exit : Close the configuration tool program. Hardwired Internet Connectivity Wizard (WIZnet, Inc.) 19 ...

  • Page 20

    ... Serial configuration Figure 9. Configuration Tool (Serial Config.) ⓡ Serial Serial Configuration value of selected module is displayed. In order to change the serial configuration of WIZ100SR, this menu can be used. ☞ By clicking the “Setting” button, changed value can be applied. . Hardwired Internet Connectivity Wizard (WIZnet, Inc.) ⓡ ...

  • Page 21

    ... In order to close the connection, the „Close‟ command should be given. This function can be used for more than two or more systems to connect to a WIZ100SR module. If one system holds the connection to the WIZ100SR, other systems can not connect to the module ...

  • Page 22

    ... Data Packing Condition You can designate how the serial data can be packed to send to the Ethernet. In default mode, WIZ100SR checks the serial buffer and sends any received data to Ethernet without any standard. Therefore, the data can be regarded as error data due to inconsistent data lenth ...

  • Page 23

    ... This function is for module configuration not through network with Configuration tool but through serial communication. When you want to set via serial communication, check “enable”. Please detail about serial configuration refers to “4. Serial Configuration”. Hardwired Internet Connectivity Wizard (WIZnet, Inc.) 23 ...

  • Page 24

    ... Select a module shown in “Board list”, and click “Upload” button. ☞ Before uploading through Ethernet, you should set the network information of WIZ100SR first by Configuration Tool program as shown abovr Fig 10. By using Ping test, you can check if network is correctly configured. ...

  • Page 25

    ... Figure 13. Open dialog box for uploading ☞ Do not upload any other files except for WIZ100SR application firmware file. ③ A dialogue box titled “Processing” will be displayed as below. Figure 14. Firmware uploading window ④ When uploading is complete, a message box with “Complete Uploading” will be displayed as shown in Figure 14 ...

  • Page 26

    ... Serial Configuration 4.1. Serial Command Format It is possible to configure WIZ100SR by using serial command. By inputting specified 3 characters you can enter into the configuration mode. The characters can be defined at the Configuration Tool. < Frame Format > Command Frame format Descriptor STX Length(bytes) 1 Table 4. Serial Configuration Frame format ...

  • Page 27

    ... MAC Address Not Use Use RV IP address RW Domain RY PPPoE ID Hardwired Internet Connectivity Wizard (WIZnet, Inc.) Comments Set Local IP Set Subnet mask Set Gateway Set Local IP‟s port number Set the IP configuration method Set the TCP operation mode Set Protocol(TCP or UDP) Set the serial baud rate, data, parity and flow control ...

  • Page 28

    ... 0~255 QT 0~65535 QI 0~65535 Table 8. Serial Configuration Command Code Hardwired Internet Connectivity Wizard (WIZnet, Inc.) Comments PPPoE Password Check Get Local IP Get Subnet mask Get Gateway Get Local IP‟s port number Get the IP configuration method Get the operation mode Get the Protocol ...

  • Page 29

    ... WIZ100SR Configuration with Serial Command Figure 16. Serial Configuration Enable Setting ① Check WIZ100SR Firmware Version. If Version is lower, download the latest firmware from download page of http://www.wiznet.co.kr ② At the default status, the serial configuration is disabled. So, click „enable‟ check box of serial configuration and click „setting‟ button. The defaut value of string is “+++”. ...

  • Page 30

    ... Above process is shown in the serial console as below figure. WIZ100SR/WIZ110SR Ver. 03.01 MAC ADDRESS SUBNET MASK G/W IP ADDRESS LOCAL IP ADDRESS : 192.168.11.2 > Config socket : ok > Listen : Ok <E><S><S192.168.11.3><S> WIZ100SR/WIZ110SR Ver. 03.01 MAC ADDRESS SUBNET MASK G/W IP ADDRESS LOCAL IP ADDRESS : 192.168.11.3 > Config socket : ok > Listen : Ok Figure 17. Serial Configuration Console Display Hardwired Internet Connectivity Wizard (WIZnet, Inc ...

  • Page 31

    ... Descriptor STX Command „<‟(0x3C) Length(bytes) 1 Table 11. Hardware Configuration Reply Frame format Command Code Command Table 12. Hardware Configuration Command Code Hardwired Internet Connectivity Wizard (WIZnet, Inc.) Command code Parameter Variable 1 Variable Reply code Parameter S Variable 1 Variable Comments ...

  • Page 32

    ... Password for TCP Server FF Last Byte (It means end of parameter) Table 13. Hardware Configuration Parameter descriptions Reply for Entrance Hardware Command Mode (Hex : 0x3B) [Normal mode] ; [Debug mode] WIZ100SR/WIZ110SR Ver. 03.01 ; Table 14. Hardware Configuration Entrance Message Hardwired Internet Connectivity Wizard (WIZnet, Inc.) FF: FE: FD: FA: ...

  • Page 33

    ... Configuration. If module is set as „Debug mode‟, the message is displayed after showing model name and version. WIZ100SR/WIZ110SR Ver. 03.01 ; STEP 3. Input „>R‟ and Carriage Return(0x0D). STEP 4. Check response message. WIZ100SR/WIZ110SR Ver. 03.01 ;<S0008DC135E2401C0A80B03FFFFFF00C0A80B011388C0A80B011388FE080001 000000000000000000030100000000000000000020202020202020202020202020 202020202020202020202020202020202020012B2B2B0020202020202020202020 202020202020202020202020202020202020202020002020202020202020202020 2020202020202020202020202020202020202020000000000000000000FF 5.2.2. Changing IP Address When changing the parameter value, the MAC addres is not changed. As MAC address is the unique value for the module, user can‟ ...

  • Page 34

    ... PIN Assignment and Dimenstion Figure 18. WIZ100SR Pin Assignment PIN NAME RESET Reset (Active High) TXD RS-232 Data Output RTS RS-232 Request To Send DTR RS-232 Data Terminal Ready RXD RS-232 Data Input CTS RS-232 Clear To Send DSR RS-232 Data Set Ready TPRX- ...

  • Page 35

    ... All signal level is 3.3V LVTTL high on RESET pin about minimum 1.2 usec must be applied for proper operation. 3) „Connected‟ of Status pin means the TCP socket of WIZ100SR is connected to remote system. 4) /LINK_LED pin is used to check if Ethernet cable is physically connected or not. Figure 19. WIZ100SR Board Dimension Symbol Table 16 ...

  • Page 36

    ... Demonstration and Test In this chapter, we give an example that can be used to test the function of WIZ100SR. The testing environment is as follows; <Hardware> PC having RS-232 serial port  WIZ100SR & WIZ100SR Test Board  2.0 or above) Ethernet cable (Direct or Crossover) to connect PC and WIZ100SR  Serial cable to connect the COM port of PC and serial port of WIZ100SR  ...

  • Page 37

    ... Make sure JP4(Mode Switch) is set as normal mode. network is disabled, and Configuration Tool can not be used) ② Connect the PC and WIZ100SR Test board by using serial cable. ③ Connect the PC and WIZ100SR Test board by using Ethernet cable. ④ Power on the WIZ100SR Test Board. ...

  • Page 38

    ... Figure 22. Result Window after Running “Setting” STEP3. (Data Transmission) ① Run terminal emulator program (e.g. Hyper terminal) on Test PC. ② Set the baud rate as the same value of WIZ100SR Figure 23. Serial Terminal Program configuration Hardwired Internet Connectivity Wizard (WIZnet, Inc.) 38 ...

  • Page 39

    ... Type some charater on the serial Hyper terminal screen. In this example, “01234567890” is entered. ⑤ Make sure this data is shown on the Network Hyper terminal window. (Serial to Ethernet) Figure 25. Received Data by Network Terminal Program ⑥ As the same way, type some charaters on the network Hyper terminal, and then make Hardwired Internet Connectivity Wizard (WIZnet, Inc.) 39 ...

  • Page 40

    ... At the Network Terminal, the lower part of the program possible to test both of TCP Client and TCP Server modes. If Server Mode is checked, Device Terminal will operate as server mode, and the WIZ100SR module will work as client mode. The PC where the Device Terminal is operating will work as a server, the IP address of the PC should be set as Server IP of the module ...

  • Page 41

    ... Reference Schematic Hardwired Internet Connectivity Wizard (WIZnet, Inc.) Figure 27. Schematic 41 ...

  • Page 42

    ... Document Revision History Date Revision 2007-09-01 V1.0 Added PPPoE descriptions(F/W updated) 2008-02-27 V1.1 Added serial configuration command Removed Hardware configuration description 2008-06-04 V2.0 Added and modified serial configuration Command (F/W updated to ver3.1) Added Hardware Configuration (Chapter 5) Hardwired Internet Connectivity Wizard (WIZnet, Inc.) Changes First Release 42 ...