WIZ100SR-EVB WIZnet, WIZ100SR-EVB Datasheet - Page 37

• Manufacturer Part Number: WIZ100SR-EVB
• Description: Interface Development Tools EVALUATION BOARD FOR WIZ100SR
• Manufacturer: WIZnet
• Type: Serial to Ethernetr

Specifications of WIZ100SR-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WIZ100SR
• Interface Type: Ethernet, RS-232
• Operating Supply Voltage: 5 V
• Dimensions: 50 mm x 30 mm x 8.85 mm
• Maximum Operating Temperature: + 80 C
• Minimum Operating Temperature: + 10 C
• Operating Supply Current: 500 mA

STEP1.
① Make sure JP4(Mode Switch) is set as normal mode.
② Connect the PC and WIZ100SR Test board by using serial cable.
③ Connect the PC and WIZ100SR Test board by using Ethernet cable.
④ Power on the WIZ100SR Test Board.
STEP2.
① Modules are searched by click search button of the Configuration Tool.
② Select the board to be configured and change the value. To apply the changed value,
③ If changed value is succefully applied, the “Complete setting” message is displayed as
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
network is disabled, and Configuration Tool can not be used)
click Setting button.
shown below figure.
(WIZ100SR Environment Setup)
Figure 21. Data Flow (Ethernet -> Serial)
(If it is set as Config mode, the
37