WIZ120SR-EVB WIZnet, WIZ120SR-EVB Datasheet - Page 28

• Manufacturer Part Number: WIZ120SR-EVB
• Description: Interface Development Tools EVALUATION BOARD FOR WIZ120SR
• Manufacturer: WIZnet
• Type: Serial to Ethernetr

Specifications of WIZ120SR-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WIZ120SR
• Interface Type: Ethernet, RS-232
• Operating Supply Voltage: 5 V
• Dimensions: 110 mm x 60 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Operating Supply Current: 200 mA

6. Demonstration and Test
In this chapter, we will provide you the procedure to test the functions of WIZ120SR.
The testing environment is as follows;
STEP1.
① Connect the computer and WIZ120SR Base Board with a serial cable.
② Connect the computer and WIZ120SR Base Board by using an Ethernet cable (Direct or
③ Power on the WIZ120SR Test Board.
STEP2.
① Modules are searched by clicking the search button of the Configuration Tool.
② Select the board to configure and change the value. To apply your changes, click the
③ If your changes are successfully applied, the “Complete setting” message will be
STEP3.
① Run terminal emulator program (e.g. HyperTerminal) on the PC.
② Set the same baud rate as specified in WIZ120SR (i.e. the value in the configuration tool)
WIZ120SR User‟s Manual (WIZnet, Inc.)
Crossover Cable).
Setting button.
displayed.
Hardware
Software
(WIZ120SR Configuration Setup)
(Data Transmission)
 PC that has a RS-232 serial port.
 WIZ120SR & WIZ120SR Base Board
 Ethernet Direct or cross-over cable which connects between PC's and
 RS-232 cable which connects the PC's COM port and WIZ120SR's serial data
 WIZ120SR Configuration tool
 HyperTerminal(or other serial terminal program)
WIZ120SR's LAN ports.
port.
22