UMFT234XF FTDI, UMFT234XF Datasheet - Page 10

• Manufacturer Part Number: UMFT234XF
• Description: Interface Development Tools USB to UART Breakout Board
• Manufacturer: FTDI
• Type: USB to UARTr

Specifications of UMFT234XF

• Rohs: yes
• Product: Development Modules
• Tool Is For Evaluation Of: FT234XD
• Interface Type: UART, USB
• Operating Supply Voltage: 1.8 V to 3.3 V
• Description/function: Development module utilizes FTDI?s FT234XD IC to convert USB to a basic UART
• Operating Supply Current: 100 mA
• For Use With: FT234XD

8
Following a power-on reset or a USB reset the FT234XD will scan its internal MTP ROM and read the USB
configuration descriptors stored there. The default values programmed into the internal MTP ROM in the
FT234XD used on the UMFT234XF are in table 4.
Parameter
Table 4 Default Internal MTP ROM Configuration
The internal MTP ROM in the FT234XD can be programmed over USB using the utility program FT_PROG.
FT_PROG can be downloaded from www.ftdichip.com. Users who do not have their own USB vendor ID
but who would like to use a unique Product ID in their design can apply to FTDI for a free block of unique
PIDs. Contact
Pull down I/O Pins in USB
Serial Number Enabled?
Max Bus Power Current
Internal MTP ROM Configuration
USB Product ID (PID)
USB Vendor ID (VID)
Manufacturer Name
Product Description
High Current I/Os
Remote Wake Up
Load VCP Driver
Serial Number
Power Source
Device Type
USB Version
Suspend
CBUS0
FTDI Support
Copyright © 2013 Future Technology Devices International Limited
([e-mail]) for this service.
Value
Bus Powered
UMFT234XF
See Note
FT234XD
PWREN#
Disabled
Disabled
Enabled
Enabled
0403h
6015h
90mA
0200
FTDI
Yes
Notes
FTDI default VID (hex)
FTDI default PID (hex)
A unique serial number is generated and programmed into
the MTP ROM during final test of the UMFT234XF module.
Enabling this option will make the device pull down on the
UART interface lines when the power is shut off (PWREN#
is high).
Returns USB 2.0 device description to the host. Note: The
device is a USB 2.0 Full Speed device (12Mb/s).
Taking RI# low will wake up the USB host controller from
suspend.
Enables the high drive level on the serial and CBUS I/O
pins.
Makes the device load the VCP driver interface for the
device.
Document Reference No.: FT_000818
UMFT234XF Datasheet
Clearance No.: FTDI#
Version 1.0
10
337