UMFT221XE-01 FTDI, UMFT221XE-01 Datasheet - Page 5

• Manufacturer Part Number: UMFT221XE-01
• Description: Interface Development Tools USB to 8-Bit SPI FT1248 Mod.
• Manufacturer: FTDI
• Type: USB to SPIr
• Series: FT221Xr

Specifications of UMFT221XE-01

• Rohs: yes
• Product: Development Modules
• Tool Is For Evaluation Of: FT221XQ
• Interface Type: I2C, SPI, USB
• Operating Supply Voltage: 3.3 V
• Description/function: USB to 8bit SPI evaluation module
• Dimensions: 29.02 mm x 19.24 mm x 9.2 mm
• Operating Supply Current: 1 A
• Factory Pack Quantity: 25
• For Use With: FT221XQ

4.2
Pin No.
J1-1,
J2-5
J1-2
J1-3
J1-4
J1-5
J1-6
J1-7
J1-8
J1-9
J1-10
J2-1
J2-2
J2-3
J2-4
J2-6
J2-7
J2-8
J2-9
J2-10
Table 4.1 – Module Pin Out Description
Signal Descriptions
Name
GND
3V3OUT
VCCIO
IO6
IO5
IO4
IO3
IO2
IO1
IO0
SLD
VBUS
VCC
IO7
RESET#
CBUS3
MISO
SS#
SCLK
Type
PWR
Power
Input/
Output
Power
Input
I/O
I/O
I/O
I/O
I/O
I/O
I/O
GND
Power
Output
Power
Input
I/O
Input
I/O
Output
Input
Input
Description
Module Ground Supply Pins
3.3V output from integrated L.D.O. regulator. This pin is decoupled with a 100nF
capacitor to ground on the PCB module. The prime purpose of this pin is to provide
the 3.3V supply that can be used internally. For power supply configuration details
see section 5.
+1.8V to +3.3V supply to the UART Interface and CBUS I/O pins. For power supply
configuration details see section 5.
FT1248 Bi-Directional data bit 6.
FT1248 Bi-Directional data bit 5.
FT1248 Bi-Directional data bit 4.
FT1248 Bi-Directional data bit 3.
FT1248 Bi-Directional data bit 2.
FT1248 Bi-Directional data bit 1.
FT1248 Bi-Directional data bit 0.
USB Cable Shield. Connected to GND via a 0 ohm resistor.
5V Power output from the USB bus. For a low power USB bus powered design, up to
100mA can be sourced from the 5V supply and applied to the USB bus. A maximum
of 500mA can be sourced from the USB bus in a high power USB bus powered design.
Currents up to 1A can be sourced from a dedicated charger and applied to the USB
bus.
5V power input for FT221X. For power supply configuration details see section 5.
FT1248 Bi-Directional data bit 7.
FT221X active low reset line. Configured with an on board pull-up and recommended
filter capacitor.
Configurable CBUS I/O Pin. Function of this pin is configured in the device internal
MTP ROM. See CBUS Signal Options, Table 4.2.
Master In Serial Out. Used to provide status information to the FT1248 interface
master.
FT1248 Chip select input to enable the device interface. Active low logic.
FT1248 Clock input from FT1248 interface master
Copyright © 2012 Future Technology Devices International Limited
Document Reference No.: FT_000651
Clearance No.: FTDI#
5
UMFT221XE
Version 1.0
293