RS9110-N-11-02-EVB Redpine Signals, RS9110-N-11-02-EVB Datasheet - Page 11

• Manufacturer Part Number: RS9110-N-11-02-EVB
• Description: WiFi / 802.11 Development Tools RS9110-N-11-02 Evaluation Board
• Manufacturer: Redpine Signals

Specifications of RS9110-N-11-02-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: RS9110-N-11-02
• Protocol Supported: 802.11 b/g/e/i
• Frequency: 2.4 GHz
• Interface Type: SDIO, SPI
• Operating Supply Voltage: 3.3 V
• Antenna Connector Type: Chip
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Modulation Technique: CCK, DSSS, OFDM

2.4: Recommended Reflow Profile
2.5: Baking Instructions
Redpine Signals, Inc. Proprietary and confidential
Note: The profile shown is based on SAC 305 solder (3% silver, 0.5%
copper). We recommend the ALPHA OM-338 lead-free solder paste. This
profile is provided mainly for guidance. The total dwell time depends on the
thermal mass of the assembled board and the sensitivity of the components
on it.
The RS9110-N-11-02 package is moisture sensitive and devices must be
handled appropriately. After the devices are removed from their vacuum
sealed packs, they should be taken through reflow for board assembly within
168 hours at room conditions, or stored at under 10% relative humidity. If
these conditions are not met, the devices must be baked before reflow. The
recommended baking time is nine hours at 125 C.
RS9110-N-11-02 802.11bgn WLAN Module
Version 1.49
Data Sheet
Figure 4: Reflow Profile
Page 11