WIZ610wi-EVB WIZnet, WIZ610wi-EVB Datasheet - Page 27

• Manufacturer Part Number: WIZ610wi-EVB
• Description: WiFi / 802.11 Development Tools EVALUATION BOARD FOR WIZ610WI
• Manufacturer: WIZnet

Specifications of WIZ610wi-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WIZ610wi
• Protocol Supported: 802.11 b/g
• Frequency: 2.4 GHz
• Interface Type: Ethernet, RS-232
• Operating Supply Voltage: 5 V
• Antenna Connector Type: U.FL
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 30 C

communication between WIZ610wi and WIZ610wi. When this mode is selected, AP function
operates at the same time.
below page appears.
Authentication : You can select an authentication method for the clients to connect to AP.
Security : Configure the security options for WIZ610wi. When you click “Setup” button,
Open System or
Shared Key
Open
with 802.1x
Shared Key
WPA RADIUS
WPA PSK
WPA2 RADIUS
Field
System
No authentication is imposed to the WIZ610wi.
When enabling WEP, the configuration is activated.
The client authentication is performed by RADIUS server.
Configure the port number, IP address and Password of RADIS
server.
WEB function is activated. Input the Key value.
WPA: Wi-Fi Protected Access
WPA is based on TKIP(Temporal Key Integrity Protocol) IEEE802.11i
standard which complements WEP(Wired Equivalent Privacy). WPA
is the upgraded authentication methods by applying 802.1x and
EAP (Extensible Authentication Protocol).
WPA Pre-Shared-Key is the authentication method using Pre-
Shared Key. Configure PSK format and input value for PSK.
WPA2 is using AES(Advanced Encryption Shared) algorithm. AES is
more strengthened encryption method rather than RC4 which is
used for WEP or WPA. WPA2 RADIUS performs AES encryption
and RADIUS server authentication. If WIZ610wi uses WPA2, it can
be compatible with devices using WPA1.
Figure 19. Wireless Security Setup
Description
19