ADP5062CP-EVALZ Analog Devices, ADP5062CP-EVALZ Datasheet - Page 41

• Manufacturer Part Number: ADP5062CP-EVALZ
• Description: Power Management IC Development Tools ADP5062 Evaluation board
• Manufacturer: Analog Devices
• Type: Linear Regulators - Standardr
• Series: ADP5062r

Specifications of ADP5062CP-EVALZ

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: ADP5062
• Input Voltage: 4 V to 6.7 V
• Description/function: Battery charger (isolated flyback)
• Interface Type: I2C
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Output Current: 2.1 A
• Factory Pack Quantity: 1
• For Use With: ADP5062

Data Sheet
I
Table 46. I
Bit Name
CHG_VLIM[1:0]
DIS_RCH
EN_WD
DIS_IC1
EN_CHG
EN_JEITA
JEITA_SELECT
EN_CHG_VLIM
IDEAL_DIODE[1:0]
DIGITAL INPUT AND OUTPUT OPTIONS
Table 47. I
Option
00 = SYS_EN is activated when LDO is active and system voltage is available
01 = SYS_EN is activated by ISO_Bx voltage; battery charging mode
10 = SYS_EN is activated and the isolation FET is disabled when the battery drops below V
11 = SYS_EN is active in LDO mode when the charger is disabled. SYS_EN is active in charging mode when V
1
2
This option is active when VINx = 0 V and the battery monitor is activated from Register 0x07, Bit D5 (EN_BMON).
C REGISTER DEFAULTS
2
2
C Register Default Settings
C Address 0x11, Bits[1:0] SYS_EN Output Default
I
Address 0x03, Bits[1:0]
Address 0x05, Bit 7
Address 0x06, Bit 2
Address 0x07, Bit 6
Address 0x07, Bit 0
Address 0x08, Bit 7
Address 0x08, Bit 6
Address 0x08, Bit 5
Address 0x08, Bits[4:3]
2
C Register Address, Bit Location
Rev. 0 | Page 41 of 44
Option
0 = limit 3.2 V
1 = limit 3.7 V
0 = recharge enabled
1 = recharge disabled
0 = watchdog disabled
1 = watchdog enabled
0 = not activated
1 = activated
0 = charging disabled
1 = charging enabled
0 = JEITA disabled
1 = JEITA enabled
0 = JEITA1 charging
1= JEITA2 charging
0 = limit disabled
1 = limit enabled
00 = ideal diode operates when V
01 = ideal diode operates when V
and V
10 = ideal diode is disabled
11 = ideal diode is disabled
BAT_SNS
> V
WEAK
WEAK
1
ISO_Sx
ISO_Sx
ISO_Bx
< V
< V
ISO_Bx
ISO_Bx
≥ V
WEAK
Selection
0 = limit 3.2 V
0 = recharge enabled
0 = disabled
0 = not activated
0 = charging disabled
0 = JEITA disabled
0 = JEITA1 charging
0 = limit disabled
00 = V
Selection (Default)
00
ISO_Sx
ADP5062
< V
ISO_Bx