TC58DVM72A1FT Toshiba, TC58DVM72A1FT Datasheet - Page 32

• Manufacturer Part Number: TC58DVM72A1FT
• Description: IC FLASH 128MBIT 50NS 48TSOP
• Manufacturer: Toshiba

Specifications of TC58DVM72A1FT

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 128M (16M x 8)
• Speed: 50ns
• Interface: Serial
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 48-TSOP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

(13)
Bad Block Test Flow
Invalid blocks (bad blocks)
do not use these bad blocks.
The device contains unusable blocks. Therefore, at the time of use, please check whether a block is bad and
Figure 26.
Block No.
* 1: No erase operation is allowed to detected bad blocks
Block No.
Bad Block
Bad Block
No
1
FFFFh(x16). For Bad Block, all bytes are not in the FFh state(x8) or FFFFh
state(x16). Please don’t perform erase operation to Bad Block.
Figure 27 shows the test flow for bad block detection. Bad blocks which are
detected by the test flow must be managed as unusable blocks by the
system.
isolated from the Bit line by the Select gate
Valid (Good) Block Number
At the time of shipment, all data bytes in a Valid Block are FFh(x8) or
Check if the device has any bad blocks after installation into the system.
A bad block does not affect the performance of good blocks because it is
The number of valid blocks at the time of shipment is as follows:
Block No.
Block No
Read Check
Figure 27
Start
End
TC58DVM72A1FT00/ TC58DVM72F1FT00
TC58DAM72A1FT00/ TC58DAM72F1FT00
Pass
Yes
1024
1
Fail
1004
MIN
Read Check : to verify the column address 517
Bad Block * 1
TYP.
bytes(x8) or 256 and 261
words(x16) of the first page in the
block with FFh(x8) or FFFFh(x16)
2003-01-24 32/34
MAX
1024
Block
UNIT