MD2534-D2G-X-P SanDisk, MD2534-D2G-X-P Datasheet - Page 48

• Manufacturer Part Number: MD2534-D2G-X-P
• Description: IC MDOC H3 2GB FBGA
• Manufacturer: SanDisk

Specifications of MD2534-D2G-X-P

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 2G (256M x 8)
• Interface: Parallel
• Voltage - Supply: 1.65 V ~ 1.95 V, 2.5 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 115-TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Speed: -

Note: This register cannot be accessed when the A0 signal is pulled high. Therefore it is
7.3.13 Power-Down Register
Description:
Address (hex): 940C (128KB window) / 140C (8KB window)
Type:
7.3.14 Power Mode Register
Description:
Address (hex): 9416 (128KB window) / 1416 (8KB window)
Type:
Note: This register cannot be accessed when the A0 signal is pulled high. Therefore it is
48
Bit number
Read/Write R
Bit name
Reset value
WAKE_UP_SEL_BIT Selects the device wake up trigger
Bit number
Read/Write
Bit name
Reset value
POWER_DN
recommended that A0 will be connected to Host CPU A0, or to VSS.
recommended that A0 will be connected to Host CPU A0, or to VSS.
D15-D9
RFU
0
D15-D1
R
RFU
0
This 16-bit register controls the device response to the DPD input signal.
Read / Write
This 16-bit register is used to put mDOC H3 into Deep Power Down mode.
Read / Write
Setting this bit to ‘1’ will put the device to Deep Power Down mode.
0: mDOC H3 CE# is the wakeup trigger.
1: Read access (CE# & OE# assertion) or write access (CE# and
WE# assertion) is the wakeup trigger.
Data Sheet (Preliminary) Rev. 0.2
D8
R/W
WAKE_UP_SEL_BIT
0
D0
W
POWER_DN
0
D7-D0
R
RFU
0
mDOC H3 Embedded Flash Drive
92-DS-1205-10