VIPER12ADIP-E STMicroelectronics, VIPER12ADIP-E Datasheet - Page 6

• Manufacturer Part Number: VIPER12ADIP-E
• Description: IC OFFLINE SWIT PWM SMPS CM 8DIP
• Manufacturer: STMicroelectronics
• Series: VIPER™r
• Type: Pulse Width Modulator Controllerr

Specifications of VIPER12ADIP-E

• Output Isolation: Isolated
• Frequency Range: 54 ~ 66kHz
• Voltage - Input: 8 ~ 50 V
• Voltage - Output: 730V
• Power (watts): 8W
• Operating Temperature: 25°C ~ 125°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Current, Supply: 4.5 mA
• Frequency, Oscillator: 60 kHz
• Package Type: DIP-8
• Regulator Type: Switching
• Resistance, Thermal, Junction To Case: 15 °C/W
• Temperature, Operating, Range: -40 to +150 °C
• Time, Fall: 100 ns
• Time, Rise: 50 ns
• Voltage, Supply: 18 V
• Output Voltage: 38 V
• Output Power: 5 W
• Input Voltage: 0 V to 50 V
• Switching Frequency: 60 KHz
• Operating Temperature Range: - 40 C to + 150 C
• Mounting Style: Through Hole
• For Use With: 497-6413 - BOARD EVAL VIPER12A LP AC/DC497-5084 - EVAL BOARD TRAVEL ADAPTOR 3.6W497-5082 - EVAL BOARD FLYBACK PWR SUPPLY 6W497-4932 - BOARD POWER SUPPLY 1.8W VIPER12A497-4931 - BOARD 6W DUAL OUTPUT VIPER12A497-4930 - BOARD 6W SINGLE OUTPUT VIPER12A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-5575-5; VIPER12ADIP-E

Pin connections and function
3
6/21
Pin connections and function
Figure 2.
Figure 3.
Table 9.
Pin Name
SOURCE
DRAIN
SOURCE
SOURCE
V
FB
DD
VDD
FB
Pin function
Pin connection
Current and voltage conventions
1
2
3
4
Power supply of the control circuits. Also provides a charging current during start up
thanks to a high voltage current source connected to the drain. For this purpose, an
hysteresis comparator monitors the V
- V
off the start up current source.
- V
the start up current source.
Power MOSFET source and circuit ground reference.
Power MOSFET drain. Also used by the internal high voltage current source during
start up phase for charging the external V
Feedback input. The useful voltage range extends from 0 V to 1 V, and defines the
peak drain MOSFET current. The current limitation, which corresponds to the
maximum drain current, is obtained for a FB pin shorted to the SOURCE pin.
DDon
DDoff
SO-8
: Voltage value (typically 14.5 V) at which the device starts switching and turns
: Voltage value (typically 8 V) at which the device stops switching and turns on
V
DD
I
DD
V
FB
8
7
6
5
I
FB
Doc ID 11977 Rev 2
DRAIN
DRAIN
DRAIN
DRAIN
VIPer12A
FB
VDD
CONTROL
Pin Function
DD
voltage and provides two thresholds:
DD
SOURCE
DRAIN
capacitor.
SOURCE
SOURCE
VDD
FB
1
2
3
4
I
D
V
D
DIP-8
VIPER12A-E
8
7
6
5
DRAIN
DRAIN
DRAIN
DRAIN