VIPER22ADIP-E STMicroelectronics, VIPER22ADIP-E Datasheet - Page 21

IC OFFLINE SWIT PWM SMPS 8DIP

VIPER22ADIP-E

Manufacturer Part Number
VIPER22ADIP-E
Description
IC OFFLINE SWIT PWM SMPS 8DIP
Manufacturer
STMicroelectronics
Series
VIPER™r
Type
Pulse Width Modulator Controllerr

Specifications of VIPER22ADIP-E

Output Isolation
Isolated
Frequency Range
54 ~ 66kHz
Voltage - Input
8 ~ 50 V
Voltage - Output
730V
Power (watts)
12W
Operating Temperature
25°C ~ 125°C
Package / Case
8-DIP (0.300", 7.62mm)
Output Voltage
38 V
Output Power
12 W
Input Voltage
0 V to 50 V
Switching Frequency
60 KHz
Operating Temperature Range
- 40 C to + 150 C
Mounting Style
Through Hole
Current, Supply
4.5 mA
Frequency, Oscillator
60 kHz
Package Type
DIP-8
Regulator Type
Switching
Resistance, Thermal, Junction To Case
15 °C/W
Temperature, Operating, Range
-40 to +150 °C
Time, Fall
100 ns
Time, Rise
50 ns
Voltage, Supply
18 V
Supply Voltage
38V
Digital Ic Case Style
DIP
No. Of Pins
8
No. Of Regulated Outputs
1
Filter Terminals
DIP
Rohs Compliant
Yes
For Use With
497-9049 - BOARD EVAL BASED VIPER22ASTR-E497-8215 - BOARD EVAL BASED ON VIPER22A497-5864 - EVAL BOARD DUAL OUTPUT VIPER22A497-5071 - EVAL BOARD DIMMABLE HB PWR LEDVIPER22-LED-EV - VIPER LED POWER SUPPLY
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
497-7694-5
VIPER22ADIP-E

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
VIPER22ADIP-E
Manufacturer:
SANYO
Quantity:
914
Part Number:
VIPER22ADIP-E
Manufacturer:
ST
Quantity:
907 890
Part Number:
VIPER22ADIP-E
Manufacturer:
ST
0
Part Number:
VIPER22ADIP-E
Manufacturer:
ST
Quantity:
20 000
Part Number:
VIPER22ADIP-E
Manufacturer:
ST
Quantity:
19 480
Part Number:
VIPER22ADIP-E
Manufacturer:
ST
Quantity:
15 194
Part Number:
VIPER22ADIP-E
0
Company:
Part Number:
VIPER22ADIP-E
Quantity:
50 000
Part Number:
VIPER22ADIP-E(P/B)
Manufacturer:
ST
0
Part Number:
VIPER22ADIP-E,VIPER22ASTR,VIPER22A,VIPER22AS,
Manufacturer:
ST
0
VIPer22A-E, VIPer22ADIP-E, VIPer22AS-E
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 12050 Rev 2
21/21

Related parts for VIPER22ADIP-E