ICE3DS01L Infineon Technologies, ICE3DS01L Datasheet - Page 2

• Manufacturer Part Number: ICE3DS01L
• Description: IC OFFLINE CTRLR SMPS CM 8DIP
• Manufacturer: Infineon Technologies
• Series: CoolSET®F3r

Specifications of ICE3DS01L

• Output Isolation: Isolated
• Frequency Range: 98 ~ 119kHz
• Voltage - Input: 8.5 ~ 22 V
• Voltage - Output: 500V
• Power (watts): 900mW
• Operating Temperature: -40°C ~ 150°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• For Use With: EVALSF3-ICE3DS01G-60WIN - BOARD DEMO ICE3DS01G 60W SO-8EVALSF3-ICE3DS01IN - BOARD DEMO ICE3DS01 60W 8-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ICE3DS01LX; ICE3DS01LXK; SP000014265

ICE3DS01L(G)
Revision History:
Previous Version:
Page
For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon
Technologies Companies and Representatives worldwide: see our webpage at http://www.infineon.com
CoolMOS™, CoolSET™ are trademarks of Infineon Technologies AG.
Edition 2005-11-15
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München
©
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Tech-
nologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended
to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is rea-
sonable to assume that the health of the user or other persons may be endangered.
Infineon Technologies AG 1999.
Subjects (major changes since last revision)
update to PB-free package
2005-11-15
2.0
Datasheet