P-130SCR/A34 Panasonic - BSG, P-130SCR/A34 Datasheet - Page 11

• Manufacturer Part Number: P-130SCR/A34
• Description: BATTERY NICAD SC SIZE R TYPE
• Manufacturer: Panasonic - BSG

Specifications of P-130SCR/A34

• Battery Cell Size: SC - Flat Top
• Voltage - Rated: 1.2V
• Capacity: 1300mAh
• Rechargeability: Yes
• Termination Style: Flat Top (Non-Extending)
• Internal Resistance: *
• Standard Charge Time: *
• Standard Charge Current: *
• Weight: 1.66 oz (47.06g)
• Lead Free Status / RoHS Status: Lead free / RoHS compliant by exemption
• Size / Dimension: -
• Other names: P-130SCR; P-130SCR/FT; P159

CHARGE METHODS FOR NI-CD BATTERIES
If the charge conditions are not appropriate, not only
will the batteries not display their full performance
potential, but the cycle life could also be shortened,
and in extreme cases, electrolyte leakage could
damage the device in which the batteries are used.
Therefore, carefully select the appropriate charge
method, taking into consideration the type of battery,
(a) Cycle Use
The battery is repeatedly charged and discharged.
This is the most common method for using Ni-Cd
batteries.
(1) Methods of Charge for Ni-Cd Battery
The methods of charge for Ni-Cd batteries can be classified as follows according to the purpose of use and the
charge time.
Standby Use
Cycle Use
Classified According to Usage.
Continuous Charge
6 to 8 hours
1 to 2 hours
15 hours
Charge Time
*See Note.
NICKEL CADMIUM HANDBOOK, PAGE 10
* Not a recommended charge method for Ni-Cd batteries
dT/dt Charge System
Voltage-controlled Charge System
V-taper Controlled Charge System
Constant-voltage, Constant-current Controlled
Charge System
Timer-controlled Charge System
Semi-constant-current Charge System
Trickle Charge System
Charge Control Method
the state of discharge, the charge current, and the
ambient temperature.
The charge methods for Ni-Cd batteries can be
generally classified into two types according to the
purpose for which the batteries are used: cycle use
and standby use.
(b) Standby Use
Power is normally supplied to the load from an AC
power supply, and the Ni-Cd battery is used to
maintain the power supply to the load in the event
that the AC power supply is interrupted.
V Cut-off Charge System
(a) Cycle Use
(b) Standby Use
FEBRUARY 2002