®
Data Sheet
1
3
/
Digit, LCD/LED Display, A/D
2
Converters
The Intersil ICL7106 and ICL7107 are high performance, low
1
power, 3
/
digit A/D converters. Included are seven
2
segment decoders, display drivers, a reference, and a clock.
The ICL7106 is designed to interface with a liquid crystal
display (LCD) and includes a multiplexed backplane drive;
the ICL7107 will directly drive an instrument size light
emitting diode (LED) display.
The ICL7106 and ICL7107 bring together a combination of
high accuracy, versatility, and true economy. It features auto-
zero to less than 10µV, zero drift of less than 1µV/
bias current of 10pA (Max), and rollover error of less than
one count. True differential inputs and reference are useful in
all systems, but give the designer an uncommon advantage
when measuring load cells, strain gauges and other bridge
type transducers. Finally, the true economy of single power
supply operation (ICL7106), enables a high performance
panel meter to be built with the addition of only 10 passive
components and a display.
Ordering Information
PART NO.
PART MARKING
ICL7106CPL
ICL7106CPL
ICL7106CPLZ (Note 2)
ICL7106CPLZ
ICL7106CM44
ICL7106CM44
ICL7106CM44Z (Note 2)
ICL7106CM44Z
ICL7106CM44ZT (Note 2)
ICL7106CM44Z
ICL7107CPL
ICL7107CPL
ICL7107CPLZ (Note 2)
ICL7107CPLZ
ICL7107RCPL
ICL7107RCPL
ICL7107RCPLZ (Note 2)
ICL7107RCPLZ
ICL7107SCPL
ICL7107SCPL
ICL7107SCPLZ (Note 2)
ICL7107SCPLZ
ICL7107CM44
ICL7107CM44
ICL7107CM44T
ICL7107CM44
ICL7107CM44Z (Note 2)
ICL7107CM44Z
ICL7107CM44ZT (Note 2)
ICL7107CM44Z
NOTES:
1. “R” indicates device with reversed leads for mounting to PC board underside. “S” indicates enhanced stability.
2. Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications.
1
ICL7106, ICL7107, ICL7107S
December 1, 2005
Features
• Guaranteed Zero Reading for 0V Input on All Scales
• True Polarity at Zero for Precise Null Detection
• 1pA Typical Input Current
• True Differential Input and Reference, Direct Display Drive
- LCD ICL7106, LED lCL7107
• Low Noise - Less Than 15µV
• On Chip Clock and Reference
• Low Power Dissipation - Typically Less Than 10mW
o
C, input
• No Additional Active Circuits Required
• Enhanced Display Stability
• Pb-Free Plus Anneal Available (RoHS Compliant)
TEMP. RANGE
(°C)
PACKAGE
0 to 70
40 Ld PDIP
0 to 70
40 Ld PDIP(Pb-free) (Note 3)
0 to 70
44 Ld MQFP
0 to 70
44 Ld MQFP (Pb-free)
0 to 70
44 Ld MQFP Tape and Reel (Pb-free) Q44.10x10
0 to 70
40 Ld PDIP
0 to 70
40 Ld PDIP(Pb-free) (Note 3)
0 to 70
40 Ld PDIP (Note 1)
0 to 70
40 Ld PDIP (Pb-free) (Notes 1, 3)
0 to 70
40 Ld PDIP (Notes 1, 3)
0 to 70
40 Ld PDIP (Pb-free) (Notes 1, 3)
0 to 70
44 Ld MQFP
0 to 70
44 Ld MQFP Tape and Reel
0 to 70
44 Ld MQFP (Pb-free)
0 to 70
44 Ld MQFP Tape and Reel (Pb-free) Q44.10x10
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
|
1-888-INTERSIL or 1-888-468-3774
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2004, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
FN3082.8
P-P
PKG. DWG. #
E40.6
E40.6
Q44.10x10
Q44.10x10
E40.6
E40.6
E40.6
E40.6
E40.6
E40.6
Q44.10x10
Q44.10x10
Q44.10x10