L6562AD STMicroelectronics, L6562AD Datasheet - Page 15

• Manufacturer Part Number: L6562AD
• Description: IC PFC CTRLR TRANSITION 8SOIC
• Manufacturer: STMicroelectronics

Specifications of L6562AD

• Mode: Discontinuous (Transition)
• Frequency - Switching: 1MHz
• Current - Startup: 30µA
• Voltage - Supply: 10.5 V ~ 22.5 V
• Operating Temperature: -25°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Output Voltage: 10.3 V
• Output Current: 0.8 A
• Input Voltage: 10.5 V to 22.5 V
• Operating Temperature Range: - 40 C to + 150 C
• Mounting Style: SMD/SMT
• For Use With: 497-9018 - DIMMABLE 80W OFFLINE LED DRIVER497-8406 - BOARD STF20NM50FD/STF7LITE39BF2497-8249 - BOARD EVAL FOR L6562AX497-8248 - BOARD EVAL FOR L6562AX497-6448 - BOARD EVAL FOR L6562A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

L6562A
Figure 19. THD optimization: standard TM PFC controller (left side) and L6562A
To overcome this issue the circuit embedded in the device forces the PFC pre-regulator to
process more energy near the line voltage zero-crossings as compared to that commanded
by the control loop. This will result in both minimizing the time interval where energy transfer
is lacking and fully discharging the high-frequency filter capacitor after the bridge. The effect
of the circuit is shown in figure 2, where the key waveforms of a standard TM PFC controller
are compared to those of the L6562A.
Essentially, the circuit artificially increases the ON-time of the power switch with a positive
offset added to the output of the multiplier in the proximity of the line voltage zero-crossings.
This offset is reduced as the instantaneous line voltage increases, so that it becomes
negligible as the line voltage moves toward the top of the sinusoid.
To maximally benefit from the THD optimizer circuit, the high-frequency filter capacitor after
the bridge rectifier should be minimized, compatibly with EMI filtering needs. A large
capacitance, in fact, introduces a conduction dead-angle of the AC input current in itself -
even with an ideal energy transfer by the PFC pre-regulator - thus making the action of the
optimizer circuit little effective.
Imains
Input current
(right side)
Rectified mains voltage
MOSFET's drain voltage
Input current
Vdrain
Imains
Input current
Rectified mains voltage
Application information
MOSFET's drain voltage
Input current
Vdrain
15/26