S-1701A2521-M5T1G Seiko Instruments, S-1701A2521-M5T1G Datasheet

no-image

S-1701A2521-M5T1G

Manufacturer Part Number
S-1701A2521-M5T1G
Description
IC DETECT/REG 400MA 2.5V SOT23-5
Manufacturer
Seiko Instruments
Datasheet

Specifications of S-1701A2521-M5T1G

Applications
Converter, Battery Powered Devices
Voltage - Input
2 ~ 6.5 V
Number Of Outputs
1
Voltage - Output
2.5V
Operating Temperature
-40°C ~ 85°C
Mounting Type
Surface Mount
Package / Case
SOT-23-5, SC-74A, SOT-25
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
© Seiko Instruments Inc., 2004-2010
The S-1701 Series, developed based on CMOS technology, is a voltage regulator with a reset function and integrates a
high-accuracy voltage detector with on-chip delay circuit and a positive voltage regulator with a low dropout voltage and high
output voltage on one chip.
The S-1701 Series is available in many types according to the selection of the voltage detector block of the voltage detector,
including a SENSE pin input product. A built-in low on-resistance transistor provides a low dropout voltage and large output
current.
Small ceramic capacitors are available and an external capacitor for delay is needless. Small SOT-23-5 and SOT-89-5
packages realize high-density mounting.
www.sii-ic.com
Features
Applications
Packages
Regulator block
Detector block
Whole regulator
*1. Attention should be paid to the power dissipation of the package when the output current is large.
*2. Refer to “ Product Name Structure” for details.
• Power supply and reset circuit for battery-powered devices
• Power supply for personal communication devices
• Power supply for home appliances
• SOT-89-5
• Output voltage:
• High-accuracy output voltage:
• High peak current capability:
• Built-in ON/OFF circuit:
• Low ESR capacitor can be used:
• High ripple rejection:
• Built-in overcurrent protector:
• Operating voltage range:
• Output voltage:
• High-accuracy output voltage:
• Output mode:
• No need of an external capacitor for delay
• Three delay time settings:
• Operating voltage range:
• Low current consumption
• Lead-free, Sn 100%, halogen-free
• SOT-23-5
CMOS VOLTAGE REGULATOR WITH RESET FUNCTION
*2
1.5 V to 5.0 V, selectable in 0.1 V steps.
±1.0%
400 mA output is possible (at V
Ensures long battery life.
During power-off: 0.1 μA typ., 1.0 μA max.
A ceramic capacitor of 1.0 μF or more can be used for the output
capacitor.
70 dB typ. (at 1.0 kHz)
Overcurrent of output transistor can be restricted.
2.0 V to 6.5 V
1.5 V to 5.5 V, selectable in 0.1 V steps.
±1.0%
Nch open-drain active low output
No delay (60 μs), 50 ms, 100 ms
0.8 V to 6.5 V
During operation: 85 μA typ.
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT
IN
≥ V
OUT(S)
+ 2.0 V)
S-1701 Series
*1
Rev.3.0
_00
1

Related parts for S-1701A2521-M5T1G

S-1701A2521-M5T1G Summary of contents

Page 1

... The S-1701 Series is available in many types according to the selection of the voltage detector block of the voltage detector, including a SENSE pin input product. A built-in low on-resistance transistor provides a low dropout voltage and large output current ...

Page 2

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION S-1701 Series Block Diagrams 1. S-1701 Series A/B/C/G/H/J types ON/OFF protector circuit VIN Reference voltage circuit *1. Parasitic diode 2. S-1701 Series D/E/F/K/L/M types ON/OFF protector circuit VIN Reference voltage circuit *1. Parasitic diode 2 *1 Overcurrent ...

Page 3

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 3. S-1701 Series N/P/Q types SENSE Overcurrent protector circuit VIN Reference voltage circuit *1. Parasitic diode 4. S-1701 Series R/S/T types SENSE Overcurrent protector circuit VIN Reference voltage circuit *1. Parasitic diode *1 + ON/OFF − ...

Page 4

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION S-1701 Series 5. S-1701 Series U/V/W types protector circuit VIN Reference voltage circuit *1. Parasitic diode 6. S-1701 Series X/Y/Z types protector circuit VIN Reference voltage circuit *1. Parasitic diode 4 *1 Overcurrent + ON/OFF − circuit ...

Page 5

... In the S-1701D to S-1701F, S-1701K to S-1701M, and S-1701U to S-1701W types (that detect output voltage), a reset signal may be output due to the undershoot of the output voltage when the input voltage or load current changes transiently. Therefore, set the detection voltage after sufficient evaluation using actual devices. *3. Refer to the “ ...

Page 6

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION S-1701 Series 2. Function list according to product type Product Type ON/OFF Pin A Provided B Provided C Provided D Provided E Provided F Provided G Provided H Provided J Provided K Provided L Provided M Provided VIN connection N (pin not provided) VIN connection P (pin not provided) ...

Page 7

... V ± 1.0% 4.2 V ± 1.0% 5.0 V ± 1.0% 4.3 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. Drawing Code ...

Page 8

... V ± 1.0% 5.0 V ± 1.0% 4.2 V ± 1.0% 5.0 V ± 1.0% 4.3 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. 8 ...

Page 9

... V ± 1.0% 4.2 V ± 1.0% 5.0 V ± 1.0% 4.3 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. ON/OFF logic : Active high Release delay time : No delay (60 μ ...

Page 10

... V ± 1.0% 5.0 V ± 1.0% 4.2 V ± 1.0% 5.0 V ± 1.0% 4.3 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. 10 ...

Page 11

... V ± 1.0% 3.0 V ± 1.0% 5.0 V ± 1.0% 1.5 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. ON/OFF logic : Active low Release delay time : No delay (60 μ ...

Page 12

... V ± 1.0% 3.3 V ± 1.0% 1.5 V ± 1.0% 5.0 V ± 1.0% 1.5 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. 12 ...

Page 13

... V ± 1.0% 2.5 V ± 1.0% 5.0 V ± 1.0% 1.5 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. ON/OFF logic : None Release delay time : No delay (60 μ ...

Page 14

... V ± 1.0% 5.0 V ± 1.0% 4.2 V ± 1.0% 5.0 V ± 1.0% 4.3 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. 14 ...

Page 15

... V ± 1.0% 3.0 V ± 1.0% 3.3 V ± 1.0% 4.2 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. ON/OFF logic ...

Page 16

... V ± 1.0% 3.2 V ± 1.0% 2.8 V ± 1.0% 3.3 V ± 1.0% 3.0 V ± 1.0% Remark 1. Please contact our sales office for products with an output voltage or detection voltage other than those specified above Please select products of environmental code = U for Sn 100%, halogen-free products. 16 ...

Page 17

... Figure 8 Pin No. Symbol 1 VIN Input voltage pin 2 VSS GND pin Shutdown pin 3 ON/OFF ( types) Detector SENSE pin 3 SENSE ( types) No connection * ( types) 4 VDOUT Detector output voltage pin 5 VOUT Regulator output voltage pin *1. The NC pin is electrically open. The NC pin can be connected to VIN or VSS. ...

Page 18

... Board size : (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. (1) When mounted on board 1200 ...

Page 19

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 Electrical Characteristics 1. S-1701 Series A/B/C/G/H/J types Item Symbol Current consumption I SS Regulator block Item Symbol *1 Output voltage V OUT(E) *2 Output current I OUT *3 Dropout voltage V drop ΔV OUT1 Line regulation ΔV • ...

Page 20

... Detection voltage temperature coefficient *7. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. *8. Since products are not screened at high and low temperatures, the specification for this temperature range is guaranteed by design, not tested in production ...

Page 21

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 2. S-1701 Series D/E/F/K/L/M types Item Symbol Current consumption I SS Regulator block Item Symbol *1 Output voltage V OUT(E) *2 Output current I OUT *3 Dropout voltage V drop ΔV OUT1 Line regulation ΔV •V IN OUT Δ ...

Page 22

... Detection voltage temperature coefficient *7. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. *8. Since products are not screened at high and low temperatures, the specification for this temperature range is guaranteed by design, not tested in production ...

Page 23

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 3. S-1701 Series N/P/Q types Item Symbol Current consumption I SS Regulator block Item Symbol *1 Output voltage V OUT(E) *2 Output current I OUT *3 Dropout voltage V drop ΔV OUT1 Line regulation ΔV •V IN OUT Δ ...

Page 24

... Detection voltage temperature coefficient *7. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. *8. Since products are not screened at high and low temperatures, the specification for this temperature range is guaranteed by design, not tested in production ...

Page 25

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 4. S-1701 Series R/S/T types Item Symbol Current consumption I SS Regulator block Item Symbol *1 Output voltage V OUT(E) *2 Output current I OUT *3 Dropout voltage V drop ΔV OUT1 Line regulation ΔV •V IN OUT Δ ...

Page 26

... Detection voltage temperature coefficient *7. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. *8. Since products are not screened at high and low temperatures, the specification for this temperature range is guaranteed by design, not tested in production ...

Page 27

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 5. S-1701 Series U/V/W types Item Symbol Current consumption I SS Regulator block Item Symbol *1 Output voltage V OUT(E) *2 Output current I OUT *3 Dropout voltage V drop ΔV OUT1 Line regulation ΔV •V IN OUT Δ ...

Page 28

... Detection voltage temperature coefficient *7. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. *8. Since products are not screened at high and low temperatures, the specification for this temperature range is guaranteed by design, not tested in production ...

Page 29

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 6. S-1701 Series X/Y/Z types Item Symbol Current consumption I SS Regulator block Item Symbol *1 Output voltage V OUT(E) *2 Output current I OUT *3 Dropout voltage V drop ΔV OUT1 Line regulation ΔV •V IN OUT Δ ...

Page 30

... Detection voltage temperature coefficient *7. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. *8. Since products are not screened at high and low temperatures, the specification for this temperature range is guaranteed by design, not tested in production ...

Page 31

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 Test Circuits 1. ON/OFF Set to power on VDOUT VIN VOUT VSS Figure 10 3. ON/OFF Set to + power on VDOUT A VIN VOUT VSS Figure 12 5. ON/OFF Set to power on VDOUT VIN VOUT VSS Figure 14 7. ...

Page 32

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION S-1701 Series 9. VIN VOUT ON/OFF VDOUT VSS Set to power off Figure 18 11. (SENSE) VDOUT VIN VOUT VSS Figure 20 13. (SENSE) VDOUT VIN VOUT VSS Figure 22 15. (SENSE) VDOUT VIN VOUT VSS ...

Page 33

... A ceramic capacitor of 1.0 μF or more can be used for C 2. S-1701 Series N/P/Q/R/S/T/U/V/W/X/Y/Z types *1. C *2. A ceramic capacitor of 1.0 μF or more can be used for C *3. U/V/W/X/Y/Z types of S-1701 series are no connection. Caution The above connection diagrams and constants will not guarantee successful operation. Perform thorough evaluation using the actual application to set the constants ...

Page 34

... The S-1701 Series requires an output capacitor between the VOUT and VSS pins for phase compensation. A ceramic capacitor with a capacitance of 1.0 μF or more provides a stable operation in all temperature ranges. When using an OS capacitor, tantalum capacitor, or aluminum electrolytic capacitor, a capacitor with a capacitance of 1.0 μF or more and an ESR of 10 Ω ...

Page 35

... Rev.3.0 _00 7. Temperature coefficient of the output voltage The shaded area in Figure 28 is the range where V temperature coefficient of the output voltage is ±100 ppm/° OUT(E) * change in the temperature of the output voltage [mV/°C] is calculated using the following equation. ΔV OUT * mV/° ΔTa OUT(S) *1 ...

Page 36

... Min. DET V DOUT Figure 29 Detection Voltage Remark The above figures show the detection voltage and release voltage when the SENSE pin is connected to VIN DET ) Max. is called the detection voltage range (refer to Figure 29). = 3.0 V, the detection voltage is a value in the range of 2.97 V ≤ (−V and some have 3 ...

Page 37

... Delay time ( The delay time is a time internally measured from the instant at which the voltage input to the VDD pin exceeds the release voltage (+ the point at which the output of the OUT pin inverts. DET ...

Page 38

... In applications where a resistor is connected to the input side (Figure 32), the through-type current which is generated when the output goes from low to high (release) causes a voltage drop equal to [through-type current] × [input resistance] across the resistor. When the input voltage drops below the detection voltage as a result, the output voltage goes from high to low ...

Page 39

... DET DET DET × = ΔTa −V ΔTa DET The temperature changes of the release voltage and the detection voltage consequently have the same sign Temperature characteristics of hysteresis voltage The temperature change of the hysteresis voltage is expressed as follows: Δ+V Δ − DET DET HYS − ...

Page 40

... Figure 34 shows the block diagram of the regulator block. The error amplifier compares the reference voltage (V feedback resistors R and output voltage free of any fluctuations of input voltage and temperature. Output voltage is selectable from the range of 1 the S-1701 Series. VIN Current supply V ref Reference voltage ...

Page 41

... The structure of the ON/OFF pin is as shown in Figure 35. Since the ON/OFF pin is neither pulled down nor pulled up internally, do not use it in the floating state. In addition, note that the current consumption increases if a voltage of 0.3 − 0 applied to the ON/OFF pin. When the ON/OFF pin is not used, connect it as follows according to the product type ...

Page 42

... The surpasses − long as it does not exceed the release voltage +V DET Nch transistor becomes OFF and V (5) In the S-1701 Series, the detection voltage can be set within the range of 1 5.5 V (operating voltage range: 0 6.5 V SENSE ...

Page 43

... If the input voltage or load current changes transiently, an undershoot or overshoot occurs in the output voltage of the regulator. In the product types in which the output voltage of the regulator is detected by the detector, if the output voltage is the detection voltage or lower due to the undershoot, the detector operates and a reset signal may be output ...

Page 44

... The internal circuit of the detector operates in the standby mode, so only the current that the detector consumes flows. The SENSE pin is connected to the VOUT pin, which is an output of the regulator in the internal circuit of the detector block, so the output voltage of the regulator (V The built-in counter timer allows selection of the release delay time from three settings (K: No delay (60 μ ...

Page 45

... The S-1701 Series U/V/W types do not provide an ON/OFF function because the ON/OFF pin is connected to the VIN pin in the circuit. The SENSE pin is connected to the VOUT pin, which is an output pin of the regulator, in the internal circuit of the detector block, so the output voltage of the regulator ( The built-in counter timer allows selection of the release delay time from three settings (U: No delay (60 μ ...

Page 46

... If the input voltage or load current changes transiently, an undershoot or overshoot occurs in the output voltage of the regulator. In the product types in which the output voltage of the regulator is detected by the detector, if the output voltage is the detection voltage or lower due to the undershoot, the detector operates and a reset signal may be output ...

Page 47

... Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic protection circuit. • In determining the output current, attention should be paid to the output current value specified in Tables the electrical characteristics and footnote *7 of the table. • SII claims no responsibility for any disputes arising out connection with any infringement by products including this IC of patents owned by a third party ...

Page 48

... Application Circuit If the desired detection voltage range is other than those provided by the S-1701 Series, the detection voltage can be changed by using a divided resistor or diode in the SENSE pin products (N/P/Q/R/S/T types) as shown in Figures 38 and 39. In the case shown in Figure 38, the hysteresis width also changes at the same time. ...

Page 49

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 Characteristics (Typical Data) 1. Regulator block (1) Output voltage vs. Output current (when load current increases) S-1701x15xx ( 25°C) OUT 2.0 1.8 2.0 V 1.6 1.4 1.2 1.0 0 0.6 0.4 0 200 400 ...

Page 50

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION S-1701 Series (3) Dropout voltage vs. Output current S-1701x15xx (V = 1.5 V) OUT 1.2 1.0 0 85°C 0.6 0.4 0 100 150 200 250 I [mA] OUT S-1701x50xx (V = 5.0 V) OUT 0.6 0 85°C 0.4 0.3 0.2 0.1 ...

Page 51

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 (5) Current consumption vs. Input voltage S-1701x15xx (V = 1.5 V) OUT 90 80 25° 85° [V] IN S-1701x50xx (V = 5.0 V) OUT 90 80 25° 85° [V] IN (6) Ripple rejection ratio S-1701x15xx ( 25°C) OUT = 1.0 μ 2 OUT 100 ...

Page 52

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION S-1701 Series 2. Detector block (1) Detection voltage vs. Ambient temperature S-1701xxx15 (−V = 1.5 V) DET 1.70 1.65 1.60 1.55 1.50 1.45 1.40 –40 – [°C] (2) Hysteresis width vs. Ambient temperature S-1701xxx15 (−V = 1.5 V) DET 7.0 6 ...

Page 53

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 (5) Release delay time vs. Ambient temperature = 1.5 V, −V S-1701xxx15 ( DET 100 −40 − [°C] = 4.5 V, −V S-1701xxx45 ( DET 100 −40 − [°C] (6) Minimum operating voltage vs. Input voltage S-1701xxx15 (5 V pull up: 100 kΩ, −V ...

Page 54

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION S-1701 Series Reference Data (1) Input transient response characteristics = 2.5 V ↔ 3 S-1701x15xx ( 5.0 μ 1.0 μ 100 mA OUT 1.62 1.60 1. 1.56 1.54 1.52 V OUT 1.50 1.48 1.46 –40 – [μs] = 6.0 V ↔ 6 ...

Page 55

... HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION Rev.3.0 _00 (3) ON/OFF pin transient response characteristics S-1701x15xx ( 25°C) OUT = 5.0 μ 1.0 μ 2 ON/OFF OUT 0 −1 − [μs] S-1701x50xx ( 25°C) OUT = 5.0 μ 1.0 μ 6 ON/OFF OUT 1 −1 − ...

Page 56

... (b) Measurement circuit of the dynamic response for S-1701 Series A/B/C/G/H/J/X/Y/Z types + Set to V power off. (c) Measurement circuit of the dynamic response for S-1701 Series D/E/F/K/L/M/U/V/W types + V Set to power off. (d) Measurement circuit of the dynamic response for S-1701 Series N/P/Q/R/S/T types + V Caution The above connection diagrams will not guarantee successful operation. ...

Page 57

... S-1701A3330-M5T1x S-1701A3331-M5T1x S-1701A3430-M5T1x S-1701A5040-M5T1x S-1701A5041-M5T1x S-1701A5042-M5T1x S-1701A5043-M5T1x Remark 1. Please contact our sales office for products with specifications other than the above Please select products of environmental code = U for Sn 100%, halogen-free products. (1) to (3): Product code (Refer to Product name vs. Product code) (4): Lot number (b) S-1701 Series B Type ...

Page 58

... S-1701E3025-M5T1x S-1701E3026-M5T1x S-1701E3326-M5T1x S-1701E3327-M5T1x S-1701E3328-M5T1x S-1701E3330-M5T1x S-1701E3430-M5T1x S-1701E5040-M5T1x S-1701E5041-M5T1x S-1701E5042-M5T1x S-1701E5043-M5T1x Remark 1. Please contact our sales office for products with specifications other than the above Please select products of environmental code = U for Sn 100%, halogen-free products. 58 (d) S-1701 Series D Type Product Code (1) (2) ( ...

Page 59

... S-1701 Series S Type Product Name S-1701S1515-M5T1x S-1701S1815-M5T1x S-1701S2515-M5T1x S-1701S2715-M5T1x S-1701S3015-M5T1x S-1701S3315-M5T1x S-1701S5015-M5T1x Remark 1. Please contact our sales office for products with specifications other than the above Please select products of environmental code = U for Sn 100%, halogen-free products. (h) S-1701 Series M Type Product Code (1) (2) (3) T ...

Page 60

... S-1701W5040-M5T1x S-1701W5041-M5T1x S-1701W5042-M5T1x S-1701W5043-M5T1x (s) S-1701 Series Y Type Product Name S-1701Y3228-M5T1x S-1701Y3342-M5T1x Remark 1. Please contact our sales office for products with specifications other than the above Please select products of environmental code = U for Sn 100%, halogen-free products. 60 (p) S-1701 Series V Type Product Code (1) (2) ...

Page 61

... S-1701C3327-U5T1x S-1701C3328-U5T1x S-1701C3430-U5T1x S-1701C5040-U5T1x S-1701C5041-U5T1x S-1701C5042-U5T1x S-1701C5043-U5T1x Remark 1. Please contact our sales office for products with specifications other than the above Please select products of environmental code = U for Sn 100%, halogen-free products. (1) to (3): Product code (Refer to Product name vs. Product code) (4) to (6): Lot number ...

Page 62

... Product Name S-1701P1515-U5T1x S-1701P1815-U5T1x S-1701P2515-U5T1x S-1701P2715-U5T1x S-1701P2843-U5T1x S-1701P2844-U5T1x S-1701P3015-U5T1x S-1701P3315-U5T1x S-1701P5015-U5T1x Remark 1. Please contact our sales office for products with specifications other than the above Please select products of environmental code = U for Sn 100%, halogen-free products. 62 (f) S-1701 Series F Type Product Code (1) (2) (3) P ...

Page 63

... S-1701V3024-U5T1x S-1701V3025-U5T1x S-1701V3026-U5T1x S-1701V3326-U5T1x S-1701V3327-U5T1x S-1701V3328-U5T1x S-1701V3430-U5T1x S-1701V5040-U5T1x S-1701V5041-U5T1x S-1701V5042-U5T1x S-1701V5043-U5T1x Remark 1. Please contact our sales office for products with specifications other than the above Please select products of environmental code = U for Sn 100%, halogen-free products. (l) S-1701 Series S Type Product Code (1) (2) ( S-1701S1515-U5T1x ...

Page 64

... Product Name S-1701X3228-U5T1x S-1701X3330-U5T1x S-1701X3342-U5T1x (s) S-1701 Series Z Type Product Name S-1701Z3228-U5T1x Remark 1. Please contact our sales office for products with specifications other than the above Please select products of environmental code = U for Sn 100%, halogen-free products. 64 (r) S-1701 Series Y Type Product Code (1) (2) ...

Page 65

...

Page 66

...

Page 67

...

Page 68

...

Page 69

...

Page 70

...

Page 71

... Seiko Instruments Inc. is strictly prohibited. • The products described herein cannot be used as part of any device or equipment affecting the human body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Seiko Instruments Inc. ...

Related keywords