LM2575S-3.3 National Semiconductor, LM2575S-3.3 Datasheet - Page 16

no-image

LM2575S-3.3

Manufacturer Part Number
LM2575S-3.3
Description
IC REG SIMPLE SWITCHER TO-263-5
Manufacturer
National Semiconductor
Series
SIMPLE SWITCHER®r
Type
Step-Down (Buck)r
Datasheet

Specifications of LM2575S-3.3

Internal Switch(s)
Yes
Synchronous Rectifier
No
Number Of Outputs
1
Voltage - Output
3.3V
Current - Output
1A
Frequency - Switching
52kHz
Voltage - Input
4 ~ 40 V
Operating Temperature
-40°C ~ 125°C
Mounting Type
Surface Mount
Package / Case
D²Pak, TO-263 (5 leads + tab)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Power - Output
-
Other names
*LM2575S-3.3

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LM2575S-3.3
Manufacturer:
TI/NS
Quantity:
10 000
Part Number:
LM2575S-3.3
Manufacturer:
LM
Quantity:
20 000
Part Number:
LM2575S-3.3
0
Part Number:
LM2575S-3.3/NOPB
Manufacturer:
TI/NS
Quantity:
12 000
Part Number:
LM2575S-3.3/NOPB
Quantity:
1 820
www.national.com
4. Catch Diode Selection (D1)
A. The catch-diode current rating must be at least 1.2 times greater
than the maximum load current. Also, if the power supply design
must withstand a continuous output short, the diode should have a
current rating equal to the maximum current limit of the LM2575.
The most stressful condition for this diode is an overload or shorted
output. See diode selection guide in Figure 8.
B. The reverse voltage rating of the diode should be at least 1.25
times the maximum input voltage.
5. Input Capacitor (C
An aluminum or tantalum electrolytic bypass capacitor located
close to the regulator is needed for stable operation.
To further simplify the buck regulator design procedure, National Semiconductor is making available computer design software to
be used with the Simple Switcher line of switching regulators. Switchers Made Simple (version 3.3) is available on a (3½ ) diskette
for IBM compatible computers from a National Semiconductor sales office in your area.
PROCEDURE (Adjustable Output Voltage Versions)
IN
)
16
4. Catch Diode Selection (D1)
A. For this example, a 3A current rating is adequate.
B. Use a 40V MBR340 or 31DQ04 Schottky diode, or any of the
suggested fast-recovery diodes in Figure 8.
5. Input Capacitor (C
A 100 μF aluminum electrolytic capacitor located near the input and
ground pins provides sufficient bypassing.
EXAMPLE (Adjustable Output Voltage Versions)
IN
)

Related parts for LM2575S-3.3