LM2576T-5.0/NOPB National Semiconductor, LM2576T-5.0/NOPB Datasheet - Page 19

• Manufacturer Part Number: LM2576T-5.0/NOPB
• Description: IC REG SIMPLE SWITCHER TO-220-5
• Manufacturer: National Semiconductor
• Series: SIMPLE SWITCHER®r
• Type: Step-Down (Buck)r

Specifications of LM2576T-5.0/NOPB

• Internal Switch(s): Yes
• Synchronous Rectifier: No
• Number Of Outputs: 1
• Voltage - Output: 5V
• Current - Output: 3A
• Frequency - Switching: 52kHz
• Voltage - Input: 4 ~ 40 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: TO-220-5 (Straight Leads)
• Current, Input Bias: 50 nA
• Current, Output: 3 A
• Current, Supply: 5 mA
• Frequency, Oscillator: 52 kHz
• Package Type: TO-220
• Regulator Type: Buck (Step-Down)
• Resistance, Thermal, Junction To Case: 2 °C/W
• Temperature, Operating, Range: -40 to +125 °C
• Voltage, Input: 40 V
• Voltage, Output: 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power - Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device
• Other names: *LM2576T-5.0; 8LM2576T-5.0/NOPB; LM2576T-5.0

Additional Applications
Note: Complete circuit not shown (see Figure 10).
DELAYED STARTUP
The ON /OFF pin can be used to provide a delayed startup
feature as shown in Figure 14. With an input voltage of 20V
and for the part values shown, the circuit provides approxi-
mately 10 ms of delay time before the circuit begins switch-
Definition of Terms
BUCK REGULATOR
A switching regulator topology in which a higher voltage is
converted to a lower voltage. Also known as a step-down
switching regulator.
BUCK-BOOST REGULATOR
A switching regulator topology in which a positive voltage is
converted to a negative voltage without a transformer.
DUTY CYCLE (D)
Ratio of the output switch’s on-time to the oscillator period.
FIGURE 13. Undervoltage Lockout
for Buck-Boost Circuit
FIGURE 15. 1.2V to 55V Adjustable 3A Power Supply with Low Output Ripple
(Continued)
01147617
01147619
19
ing. Increasing the RC time constant can provide longer
delay times. But excessively large RC time constants can
cause problems with input voltages that are high in 60 Hz or
120 Hz ripple, by coupling the ripple into the ON /OFF pin.
ADJUSTABLE OUTPUT, LOW-RIPPLE POWER SUPPLY
A 3A power supply that features an adjustable output voltage
is shown in Figure 15. An additional L-C filter that reduces
the output ripple by a factor of 10 or more is included in this
circuit.
Note: Complete circuit not shown.
CATCH DIODE OR CURRENT STEERING DIODE
The diode which provides a return path for the load current
when the LM2576 switch is OFF.
EFFICIENCY (η)
The proportion of input power actually delivered to the load.
FIGURE 14. Delayed Startup
01147618
www.national.com