LM2576T-ADJ/NOPB National Semiconductor, LM2576T-ADJ/NOPB Datasheet - Page 20

IC REG SIMPLE SWITCHER TO-220-5

LM2576T-ADJ/NOPB

Manufacturer Part Number
LM2576T-ADJ/NOPB
Description
IC REG SIMPLE SWITCHER TO-220-5
Manufacturer
National Semiconductor
Series
SIMPLE SWITCHER®r
Type
Step-Down (Buck)r
Datasheets

Specifications of LM2576T-ADJ/NOPB

Internal Switch(s)
Yes
Synchronous Rectifier
No
Number Of Outputs
1
Voltage - Output
1.23 ~ 37 V
Current - Output
3A
Frequency - Switching
52kHz
Voltage - Input
4 ~ 40 V
Operating Temperature
-40°C ~ 125°C
Mounting Type
Through Hole
Package / Case
TO-220-5 (Straight Leads)
Current, Input Bias
50 nA
Current, Output
3 A
Current, Supply
5 mA
Frequency, Oscillator
52 kHz
Package Type
TO-220
Regulator Type
Buck (Step-Down)
Resistance, Thermal, Junction To Case
2 °C/W
Temperature, Operating, Range
-40 to +125 °C
Voltage, Input
40 V
Voltage, Output
1.23 to 37 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Power - Output
-
Lead Free Status / Rohs Status
RoHS Compliant part Electrostatic Device
Other names
*LM2576T-ADJ
*LM2576T-ADJ/NOPB
LM2576T-ADJNS

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LM2576T-ADJ/NOPB
Manufacturer:
NS/国半
Quantity:
20 000
Part Number:
LM2576T-ADJ/NOPB
Manufacturer:
TI
Quantity:
19 040
Part Number:
LM2576T-ADJ/NOPB
Manufacturer:
NSC
Quantity:
11 311
Part Number:
LM2576T-ADJ/NOPB
0
Company:
Part Number:
LM2576T-ADJ/NOPB
Quantity:
15 000
www.national.com
Definition of Terms
CAPACITOR EQUIVALENT SERIES RESISTANCE (ESR)
The purely resistive component of a real capacitor’s imped-
ance (see Figure 16). It causes power loss resulting in
capacitor heating, which directly affects the capacitor’s op-
erating lifetime. When used as a switching regulator output
filter, higher ESR values result in higher output ripple volt-
ages.
Most standard aluminum electrolytic capacitors in the
100 µF–1000 µF range have 0.5Ω to 0.1Ω ESR. Higher-
grade capacitors (“low-ESR”, “high-frequency”, or “low-
inductance”) in the 100 µF–1000 µF range generally have
ESR of less than 0.15Ω.
EQUIVALENT SERIES INDUCTANCE (ESL)
The pure inductance component of a capacitor (see Figure
16). The amount of inductance is determined to a large
extent on the capacitor’s construction. In a buck regulator,
this unwanted inductance causes voltage spikes to appear
on the output.
OUTPUT RIPPLE VOLTAGE
The AC component of the switching regulator’s output volt-
age. It is usually dominated by the output capacitor’s ESR
multiplied by the inductor’s ripple current (∆I
to-peak value of this sawtooth ripple current can be deter-
mined by reading the Inductor Ripple Current section of the
Application hints.
CAPACITOR RIPPLE CURRENT
RMS value of the maximum allowable alternating current at
which a capacitor can be operated continuously at a speci-
fied temperature.
STANDBY QUIESCENT CURRENT (I
Supply current required by the LM2576 when in the standby
mode (ON /OFF pin is driven to TTL-high voltage, thus
turning the output switch OFF).
INDUCTOR RIPPLE CURRENT (∆I
The peak-to-peak value of the inductor current waveform,
typically a sawtooth waveform when the regulator is operat-
ing in the continuous mode (vs. discontinuous mode).
CONTINUOUS/DISCONTINUOUS MODE OPERATION
Relates to the inductor current. In the continuous mode, the
inductor current is always flowing and never drops to zero,
vs. the discontinuous mode, where the inductor current
drops to zero for a period of time in the normal switching
cycle.
INDUCTOR SATURATION
The condition which exists when an inductor cannot hold any
more magnetic flux. When an inductor saturates, the induc-
tor appears less inductive and the resistive component domi-
nates. Inductor current is then limited only by the DC resis-
tance of the wire and the available source current.
FIGURE 16. Simple Model of a Real Capacitor
(Continued)
IND
01147620
STBY
)
)
IND
). The peak-
20
OPERATING VOLT MICROSECOND CONSTANT (E • T
The product (in VoIt • µs) of the voltage applied to the inductor
and the time the voltage is applied. This E • T
measure of the energy handling capability of an inductor and
is dependent upon the type of core, the core area, the
number of turns, and the duty cycle.
Connection Diagrams
Note 15: (XX indicates output voltage option. See ordering information table
for complete part number.)
NS Package Number TS5B, Tape and Reel
LM2576SX-XX or LM2576HVSX-XX
LM2576S-XX or LM2576HVS-XX
LM2576T-XX or LM2576HVT-XX
5-Lead Surface-Mount Package
or LM2576HVT-XX Flow LB03
NS Package Number TS5B
NS Package Number T05A
NS Package Number T05D
LM2576T-XX Flow LB03
Bent, Staggered Leads
5-Lead TO-220 (T)
5-Lead TO-220 (T)
Straight Leads
TO-263 (S)
Top View
Top View
Top View
(Note 15)
01147625
01147621
01147622
op
constant is a
op
)

Related parts for LM2576T-ADJ/NOPB