TOP412GN Power Integrations, TOP412GN Datasheet - Page 13

• Manufacturer Part Number: TOP412GN
• Description: IC SW PWM DC-DC 48VDC 9W 8SMD
• Manufacturer: Power Integrations
• Series: TOPSwitch®r
• Type: Step-Down (Buck), Step-Up (Boost), Flyback, Forward Converterr

Specifications of TOP412GN

• Internal Switch(s): Yes
• Synchronous Rectifier: No
• Number Of Outputs: 1
• Frequency - Switching: 120kHz
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SMD Gull Wing
• Output Voltage: 5.8 V
• Input / Supply Voltage (max): 265 VAC
• Input / Supply Voltage (min): 85 VAC
• Duty Cycle (max): 70 %
• Switching Frequency: 120 KHz
• Supply Current: 1.2 mA
• Operating Temperature Range: - 40 C to + 150 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output: -
• Voltage - Output: -
• Voltage - Input: -
• Power - Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Typical Performance Characteristics
The following precautions should be followed when testing
TOPSwitch by itself outside of a power supply. The schematic
shown in Figure 11 is suggested for laboratory testing of
TOPSwitch.
When the DRAIN supply is turned on, the part will be in the
auto-restart mode. The CONTROL pin voltage will be oscillating
at a low frequency from 4.7 to 5.7 V and the DRAIN is turned
on every eighth cycle of the CONTROL pin oscillation. If the
BENCH TEST PRECAUTIONS FOR EVALUATION OF ELECTRICAL CHARACTERISTICS
CURRENT LIMIT vs. TEMPERATURE
BREAKDOWN vs. TEMPERATURE
1.2
1.0
0.8
0.6
0.4
0.2
1.1
1.0
0.9
0
-50 -25
-50 -25
Junction Temperature (°C)
Junction Temperature (°C)
0
0
25
25
50
50
75 100 125 150
75 100 125 150
CONTROL pin power supply is turned on while in this auto-
restart mode, there is only a 12.5% chance that the CONTROL
pin oscillation will be in the correct state (DRAIN active state)
so that the continuous DRAIN voltage waveform may be
observed. It is recommended that the V
turned on first and the DRAIN power supply second if continuous
drain voltage waveforms are to be observed. The 12.5% chance
of being in the correct state is due to the 8:1 counter.
FREQUENCY vs. TEMPERATURE
1.2
1.0
0.8
0.6
0.4
0.2
1.6
1.2
0.8
0.4
0
2
0
-50 -25
0
I
C
V C = 5 V
vs. DRAIN VOLTAGE
Junction Temperature (°C)
20
0
Drain Voltage (V)
25
40
50
60
75 100 125 150
TOP412/414
C
80
power supply be
100
4/99
A
13