ADM2483BRWZ Analog Devices Inc, ADM2483BRWZ Datasheet - Page 5

• Manufacturer Part Number: ADM2483BRWZ
• Description: IC TXRX RS485 ISOLATED 16SOIC
• Manufacturer: Analog Devices Inc
• Series: iCoupler®r

Specifications of ADM2483BRWZ

• Inputs - Side 1/side 2: RS-485
• Number Of Channels: 1
• Isolation Rating: 2500Vrms
• Voltage - Supply: 4.75 V ~ 5.25 V
• Data Rate: 500kbps
• Propagation Delay: 620ns
• Output Type: Logic
• Package / Case: 16-SOIC (0.300", 7.5mm Width)
• Operating Temperature: -40°C ~ 85°C
• Device Type: Differential Transceiver
• Ic Interface Type: RS485
• No. Of Drivers: 2
• Supply Voltage Range: 2.7V To 5.5V
• Driver Case Style: SOIC
• No. Of Pins: 16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ABSOLUTE MAXIMUM RATINGS
T
their respective ground.
Table 3.
Parameter
V
V
Digital Input Voltage (DE, RE, TxD)
Digital Output Voltage
Driver Output/Receiver Input Voltage
ESD Rating: Contact (Human Body
Operating Temperature Range
Storage Temperature Range
Average Output Current per Pin
θ
Lead Temperature
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degrada-
tion or loss of functionality.
DD1
DD2
JA
A
Model) (A, B Pins)
RxD
Soldering (10 sec)
Vapor Phase (60 sec)
Infrared (15 sec)
= 25°C, unless otherwise noted. All voltages are relative to
Thermal Impedance
Rating
−0.5 V to +7 V
−0.5 V to +6 V
−0.5 V to V
−0.5 V to V
−9 V to +14 V
±2 kV
−40°C to +85°C
−55°C to +150°C
−35 mA to +35 mA
73°C/W
260°C
215°C
220°C
DD1
DD1
+ 0.5 V
+ 0.5 V
Rev. B | Page 5 of 20
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ADM2483