HCPL-2530-000E Avago Technologies US Inc., HCPL-2530-000E Datasheet - Page 7

• Manufacturer Part Number: HCPL-2530-000E
• Description: OPTOCOUPLER T-OUT 2CH 1MBD 8-DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of HCPL-2530-000E

• Input Type: DC
• Package / Case: 8-DIP (0.300", 7.62mm)
• Voltage - Isolation: 3750Vrms
• Number Of Channels: 2, Unidirectional
• Current - Output / Channel: 8mA
• Data Rate: 1MBd
• Propagation Delay High - Low @ If: 200ns @ 16mA
• Current - Dc Forward (if): 25mA
• Output Type: Open Collector
• Mounting Type: Through Hole
• Isolation Voltage: 3750 Vrms
• Output Device: Transistor With Base
• Configuration: 2 Channel
• Current Transfer Ratio: 50 %
• Maximum Baud Rate: 1 MBps
• Maximum Forward Diode Voltage: 1.8 V
• Maximum Reverse Diode Voltage: 5 V
• Maximum Input Diode Current: 25 mA
• Maximum Power Dissipation: 45 mW
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 55 C
• No. Of Channels: 2
• Optocoupler Output Type: Phototransistor
• Input Current: 16mA
• Output Voltage: 20V
• Opto Case Style: DIP
• No. Of Pins: 8
• Ctr Min: 7%
• Common Mode Ratio: 1k
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-1659-5

Insulation and Safety Related Specifications
Parameter
Minimum External
Air Gap (External
Clearance)
Minimum External
Tracking (External
Creepage)
Minimum Internal
Plastic Gap
(Internal Clearance)
Minimum Internal
Tracking (Internal
Creepage)
Tracking Resistance
(Comparative
Tracking Index)
Isolation Group
Option 300 – surface mount classification is Class A in accordance with CECC 00802.
7
Symbol
L(101)
L(102)
CTI
8-Pin DIP
(300 Mil)
Value
7.1
7.4
0.08
NA
200
IIIa
SO-8
Value
4.9
4.8
0.08
NA
200
IIIa
Units
mm
mm
mm
mm
Volts
Conditions
Measured from input terminals to output to
to output terminals, shortest distance through air.
Measured from input terminals to output
terminals, shortest distance path along body.
Through insulation distance, conductor to
between the photoemitter and photodetector
inside the optocoupler cavity.
Measured from input terminals to output
terminals, along internal cavity.
DIN IEC 112/VDE 0303 Part 1
Material Group (DIN VDE 0110, 1/89, Table 1)
conductor, usually the direct distance