PC942J00000F Sharp Microelectronics, PC942J00000F Datasheet - Page 14

• Manufacturer Part Number: PC942J00000F
• Description: PHOTOCOUPLER OPIC 8-DIP
• Manufacturer: Sharp Microelectronics
• Series: OPIC™r

Specifications of PC942J00000F

• Voltage - Isolation: 5000Vrms
• Number Of Channels: 1, Unidirectional
• Current - Output / Channel: 500mA
• Propagation Delay High - Low @ If: 2µs @ 5mA
• Current - Dc Forward (if): 25mA
• Input Type: DC
• Output Type: Push-Pull, Totem-Pole
• Mounting Type: Through Hole
• Package / Case: 8-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 425-2211-5

● Cleaning instructions
● Presence of ODC
Solvent cleaning:
Ultrasonic cleaning:
Recommended solvent materials:
Solvent temperature should be 45˚C or below Immersion time should be 3 minutes or less
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol
In case the other type of solvent materials are intended to be used, please make sure they work fine in
actual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this product.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
•Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated
diphenyl ethers (PBDE).
14
PC942J00000F Series
Sheet No.: D2-A05902EN