HCPL-263N#300 Avago Technologies US Inc., HCPL-263N#300 Datasheet - Page 4

• Manufacturer Part Number: HCPL-263N#300
• Description: OPTOCOUPLER 2CH 10MBD 8-SMD GW
• Manufacturer: Avago Technologies US Inc.

Specifications of HCPL-263N#300

• Package / Case: 8-SMD Gull Wing
• Voltage - Isolation: 3750Vrms
• Number Of Channels: 2, Unidirectional
• Current - Output / Channel: 50mA
• Data Rate: 10MBd
• Propagation Delay High - Low @ If: 53ns @ 3.5mA
• Current - Dc Forward (if): 10mA
• Input Type: DC
• Output Type: Open Collector
• Mounting Type: Surface Mount, Gull Wing
• Isolation Voltage: 3750 Vrms
• Maximum Continuous Output Current: 50 mA
• Maximum Fall Time: 12 ns
• Maximum Forward Diode Current: 10 mA
• Maximum Rise Time: 42 ns
• Minimum Forward Diode Voltage: 1 V
• Output Device: Logic Gate Photo IC
• Configuration: 2 Channel
• Maximum Baud Rate: 10 MBps
• Maximum Forward Diode Voltage: 1.6 V
• Maximum Reverse Diode Voltage: 3 V
• Maximum Power Dissipation: 60 mW
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

HCPL-261A/261N/263A/263N Outline Drawing
Pin Location (for reference only)
Figure 1. 8-Pin dual in-line package device outline drawing.
Figure 2. Gull wing surface mount option #300.
4
(0.140 ± 0.005)
TYPE NUMBER
3.56 ± 0.13
(0.043 ± 0.013)
1.080 ± 0.320
0.76 (0.030)
1.40 (0.056)
PIN ONE
(0.047)
MAX.
1.19
DIMENSIONS IN MILLIMETERS (INCHES).
TOLERANCES (UNLESS OTHERWISE SPECIFIED):
LEAD COPLANARITY
MAXIMUM: 0.102 (0.004)
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
8
1
8
1
(0.100)
2.540
BSC
(0.380 ± 0.010)
9.40 (0.370)
9.90 (0.390)
9.65 ± 0.25
A XXXXZ
7
2
7
2
1.19 (0.047) MAX.
YYWW
6
3
3
6
2.28 (0.090)
2.80 (0.110)
5
4
4
0.65 (0.025) MAX.
5
1.78 (0.070) MAX.
(0.070)
2.92 (0.115) MIN.
1.780
MAX.
(0.140 ± 0.005)
OPTION CODE*
DATE CODE
(0.250 ± 0.010)
3.56 ± 0.13
6.350 ± 0.25
4.70 (0.185) MAX.
0.51 (0.020) MIN.
(0.025 ± 0.005)
0.635 ± 0.130
LAND PATTERN RECOMMENDATION
7.36 (0.290)
7.88 (0.310)
xx.xx = 0.01
xx.xxx = 0.005
1.27 (0.050)
DIMENSIONS IN MILLIMETERS AND (INCHES).
* MARKING CODE LETTER FOR OPTION NUMBERS.
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
(0.380 ± 0.010)
(0.300 ± 0.010)
(0.025 ± 0.010)
6.10 (0.240)
6.60 (0.260)
0.635 ± 0.25
9.65 ± 0.25
7.62 ± 0.25
1.02 (0.040)
0.20 (0.008)
0.33 (0.013)
12 NOM.
2.0 (0.080)
10.9 (0.430)
0.20 (0.008)
0.33 (0.013)
5 TYP.