PS2705A-1-F3-L-A CEL, PS2705A-1-F3-L-A Datasheet - Page 9

• Manufacturer Part Number: PS2705A-1-F3-L-A
• Description: OPTOISOLATOR 1CH TRANS OUT 4-SOP
• Manufacturer: CEL
• Series: NEPOCr

Specifications of PS2705A-1-F3-L-A

• Number Of Channels: 1
• Input Type: AC, DC
• Voltage - Isolation: 3750Vrms
• Current Transfer Ratio (min): 100% @ 5mA
• Current Transfer Ratio (max): 300% @ 5mA
• Voltage - Output: 70V
• Current - Output / Channel: 30mA
• Current - Dc Forward (if): ±30mA
• Vce Saturation (max): 300mV
• Output Type: Transistor
• Mounting Type: Surface Mount
• Package / Case: 4-SOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by Soldering Iron
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak Temperature (lead part temperature)
• Time (each pins)
• Flux
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220 C
• Time to preheat temperature from 120 to 180 C
• Number of reflows
• Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100 C
260 C or below (molten solder temperature)
10 seconds or less
120 C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Data Sheet PN10397EJ04V0DS
350 C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
260 C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
PS2705A-1
9