PC512 Sharp Microelectronics, PC512 Datasheet - Page 9

• Manufacturer Part Number: PC512
• Description: PHOTOCOUPLER TRAN OUT WIDE 4PIN
• Manufacturer: Sharp Microelectronics

Specifications of PC512

• Number Of Channels: 1
• Input Type: DC
• Voltage - Isolation: 5000Vrms
• Voltage - Output: 35V
• Current - Output / Channel: 20mA
• Current - Dc Forward (if): 50mA
• Vce Saturation (max): 400mV
• Output Type: Transistor
• Mounting Type: Through Hole
• Package / Case: 4-DIP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current Transfer Ratio (max): -
• Current Transfer Ratio (min): -
• Other names: 425-1406-5

■ Manufacturing Guidelines
● Soldering Method
● Cleaning instructions
● Presence of ODC
Hand soldering
Other notices
Solvent cleaning:
Ultrasonic cleaning:
Recommended solvent materials:
Hand soldering should be completed within 3s when the point of solder iron is below 400˚C.
Please don't solder more than twice.
Please don't bend lead pins from the root of package when soldering.
And please take care not to let any external force exert on lead pins.
Please don't do soldering with preheating, and please don't do soldering by reflow.
Please test the soldering method in actual condition and make sure the soldering works fine, since the impact
on the junction between the device and PCB varies depending on the tooling and soldering conditions.
Solvent temperature should be 45˚C or below Immersion time should be 3minutes or less
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances:CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
9
Sheet No.: D2-A04601EN
PC512