DMC-16207

Manufacturer Part NumberDMC-16207
DescriptionLCD MODULE 16X2 CHARACTER
ManufacturerOptrex America Inc
SeriesDMC-16207
DMC-16207 datasheets
 

Specifications of DMC-16207

Display TypeTN - Twisted NematicDisplay ModeReflective
Number Of Digits/alpha*Outline L X W X H*
Viewing Area62.00mm L x 16.00mm WBacklightWithout Backlight
Display Format16 x 2Character Size5.55mm H x 2.95mm W
Character Format5 x 8 DotsVoltage - Supply5.0V
Dot Size0.55mm W x 0.55mm HInterface*
Operating Temperature0°C ~ 50°COther names73-1025
DMC16207
OP216
1
2
3
4
5
6
7
8
9
10
11
Page 11
12
Page 12
13
Page 13
14
Page 14
15
Page 15
Page 14/15

Download datasheet (166Kb)Embed
PrevNext
10.Precautions Relating Product Handling
The Following precautions will guide you in handling our product correctly.
1) Liquid crystal display devices
① The liquid crystal display device panel used in the liquid crystal display module is made of plate
glass. Avoid any strong mechanical shock. Should the glass break handle it with care.
② The polarizer adhering to the surface of the LCD is made of a soft material.
Guard against scratching it.
2) Care of the liquid crystal display module against static electricity discharge.
① When working with the module, be sure to ground your body and any electrical equipment you may
be using. We strongly recommend the use of anti static mats ( made of rubber ), to protect work
tables against the hazards of electrical shock.
② Avoid the use of work clothing made of synthetic fibers. We recommend cotton clothing or other
conductivity-treated fibers.
③ Slowly and carefully remove the protective film from the LCD module, since this operation can
generate static electricity.
3) When the LCD module alone must be stored for long periods of time:
① Protect the modules from high temperature and humidity.
② Keep the modules out of direct sunlight or direct exposure to ultraviolet rays.
③ Protect the modules from excessive external forces.
4) Use the module with a power supply that is equipped with an overcurrent protector circuit,
since the module is not provided with this protective feature.
5) Do not ingest the LCD fluid itself should it leak out of a damaged LCD module. Should hands
or clothing come in contact with LCD fluid, wash immediately with soap.
6) Conduc1tivity is not guaranteed for models that use metal holders where solder connections
between the metal holder and the PCB are not used. Please contact us to discuss appropriate
ways to assure conductivity.
7) For models which use CFL:
① High voltage of 1000V or greater is applied to the CFL cable connector area.
Care should be taken not to touch connection areas to avoid burns.
② Protect CFL cables from rubbing against the unit and thus causing the wire jacket to become worn.
③The use of CFLs for extended periods of time at low temperatures will significantly shorten their
service life.
DMC16207* (CA) No.2000-0088
OPTREX CORPORATION
OPTREX
Page 14/15