DMC-16207 Optrex America Inc, DMC-16207 Datasheet - Page 15

no-image

DMC-16207

Manufacturer Part Number
DMC-16207
Description
LCD MODULE 16X2 CHARACTER
Manufacturer
Optrex America Inc
Series
DMC-16207r
Datasheets

Specifications of DMC-16207

Display Type
TN - Twisted Nematic
Display Mode
Reflective
Number Of Digits/alpha
*
Outline L X W X H
*
Viewing Area
62.00mm L x 16.00mm W
Backlight
Without Backlight
Display Format
16 x 2
Character Size
5.55mm H x 2.95mm W
Character Format
5 x 8 Dots
Voltage - Supply
5.0V
Dot Size
0.55mm W x 0.55mm H
Interface
*
Operating Temperature
0°C ~ 50°C
Other names
73-1025
DMC16207
OP216
This product has been manufactured to your company’s specifications as a part for use in your company’s
general electronic products. It is guaranteed to perform according to delivery specifications. For any other
use apart from general electronic equipment, we cannot take responsibility if the product is used in medical
devices, nuclear power control equipment, aerospace equipment, fire and security systems, or any other
applications in which there is a direct risk to human life and where extremely high levels of reliability are
required. If the product is to be used in any of the above applications, we will need to enter into a separate
product liability agreement.
8) For models which use touch panels:
9) For models which use COG,TAB,or COF:
10) Models which use flexible cable, heat seal, or TAB:
11.Warranty
①Do not stack up modules since they can be damaged by components on neighboring modules.
②Do not place heavy objects on top of the product. This could cause glass breakage.
①The mechanical strength of the product is low since the IC chip faces out unprotected from the rear.
②Given the fact that the rear of the IC chip is left exposed, in order to protect the unit from electrical
①In order to maintain reliability, do not touch or hold by the connector area.
②Avoid any bending, pulling, or other excessive force, which can result in broken connections.
① We cannot accept responsibility for any defect, which may arise from additional manufacturing of
② We cannot accept responsibility for any defect, which may arise after the application of strong
③ We cannot accept responsibility for any defect, which may arise due to the application of static
④ When the product is in CFL models, CFL service life and brightness will vary according to the
⑤ We cannot accept responsibility for intellectual property of a third party, which may arise through the
⑥ Optrex will not be held responsible for any quality guarantee issue for defect products judged as
DMC16207* (CA) No.2000-0088
Be sure to protect the rear of the IC chip from external forces.
damage, avoid installation configurations in which the rear of the IC chip runs the risk of making
any electrical contact.
the product (including disassembly and reassembly), after product delivery.
external force to the product.
electricity after the product has passed your company’s acceptance inspection procedures.
performance of the inverter used, leaks, etc. We cannot accept responsibility for product
performance, reliability, or defect, which may arise.
application of our product to your assembly with exception to those issues relating directly to the
structure or method of manufacturing of our product.
Optrex-origin longer than 2 (two) years from Optrex production or 1(one) year from Optrex, Optrex
America, Optrex Europe, Display LC delivery which ever comes later.
OPTREX
OPTREX CORPORATION
Page 15/15

Related parts for DMC-16207