NHD-240128WG-AFTI-VZ#C5 Newhaven Display, NHD-240128WG-AFTI-VZ#C5 Datasheet - Page 12

• Manufacturer Part Number: NHD-240128WG-AFTI-VZ#C5
• Description: LCD MOD GRAPHIC 240X128 TRANSM
• Manufacturer: Newhaven Display

Specifications of NHD-240128WG-AFTI-VZ#C5

• Display Type: FSTN - Film Super-Twisted Nematic
• Display Mode: Transmissive
• Viewing Area: 129.00mm L x 75.00mm W
• Backlight: CCFL - White
• Dot Size: 0.47mm W x 0.47mm H
• Dot Pitch: 0.50mm x 0.50mm
• Dot Pixels: 240 x 128
• Interface: Parallel
• Pixel Density: 240 x 128
• Fluid Type: FSTN Negative
• Module Size (w X H X T): 170 mm x 103.5 mm x 14 mm
• Backlighting: LED White
• Operating Temperature Range: - 20 C to + 70 C
• Product: Graphic LCD Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

(Note 4) When using the MSB=0 command, a Status Read must be performed.
(2) Setting date
(Note)
When using the T6963C, first set the data, then set the command.
Procedure for sending a command
(a)The case of 1 date
When sending more than two data, the last datum (or last two data) is valid.
If a status check is not carried out, the T6963C cannot operate normally, even after a delay
time.
The hardware interrupt occurs during the address calculation period (at the end of each
line).
If a MSB=0 command is sent to the T6963C during this period, the T6963C enters Wait
status.
If a status check is not carried out in this state before the next command is sent, there is the
possibility that the command or data date will not be received.
(b)The case of 2 data