LTST-C150KGKT Lite-On Electronics, LTST-C150KGKT Datasheet

Page 1

... Compatible With Automatic Placement Equipment. * Compatible With Infrared And Vapor Phase Reflow Solder Process. Package Dimensions Part No. LTST-C150KGKT Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.10 mm (.004") unless otherwise noted. Part No. : LTST-C150KGKT BNS-OD-C131/ Lens Water Clear Source Color AlInGaP Green Page : 1 ...

Page 2

... Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) DC Forward Current Derating Linear From 50°C Reverse Voltage Operating Temperature Range Storage Temperature Range Wave Soldering Condition Infrared Soldering Condition Vapor Phase Soldering Condition Part No. : LTST-C150KGKT BNS-OD-C131/ Ta=25 ℃ At LTST-C150KGKT 0.4 5 260° ...

Page 3

... LITE-ON TECHNOLOGY CORPORATION Suggestion Profile: (1) Suggestion IR Reflow Profile For Normal Process (2) Suggestion IR Reflow Profile For Pb Free Process file file ila Part No. : LTST-C150KGKT BNS-OD-C131/ Page : ...

Page 4

... CIE eye-response curve. 2. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λ derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part No. : LTST-C150KGKT BNS-OD-C131/ Ta=25 ℃ ...

Page 5

... LITE-ON TECHNOLOGY CORPORATION Bin Code List Bin Code Tolerance on each Forward Voltage bin is +/-0.1 volt Luminous Intensity Bin Code M N Dominant Wavelength Bin Code Tolerance for each Dominate Wavelength bin is +/- 1nm Part No. : LTST-C150KGKT BNS-OD-C131/ Forward Voltage Unit: V @20mA Min. 4 1.90 5 2.00 6 2. ...

Page 6

... LITE-ON TECHNOLOGY CORPORATION Typical (25 °C Part No. : LTST-C150KGKT BNS-OD-C131/ Electrical / Optical Characteristics Ambient Temperature Unless Curves Otherwise Noted) Page : ...

Page 7

... Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). Part No. : LTST-C150KGKT BNS-OD-C131/ Page : ...

Page 8

... LITE-ON TECHNOLOGY CORPORATION Notes: 1. Empty component pockets sealed with top cover tape inch reel-3000 pieces per reel. 3. Minimum packing quantity is 500 pcs for remainders. 4. The maximum number of consecutive missing lamps is two accordance with ANSI/EIA 481-1-A-1994 specifications. Part No. : LTST-C150KGKT BNS-OD-C131/ Page : ...

Page 9

... All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. Part No. : LTST-C150KGKT BNS-OD-C131/ CAUTIONS ...

Page 10

... Normal Process Test IR-Reflow Pb Free Process Solderability 8. Others The appearance and specifications of the product may be modified for improvement without prior notice. Part No. : LTST-C150KGKT BNS-OD-C131/ Test Condition Ta= Under Room Temperature As Per Data Sheet Maximum Rating *Test Time= 1000HRS (-24HRS,+72HRS)*@20mA. IR-Reflow In-Board, 2 Times Ta= 65± ...

Page 11

... No static charge generators (e.g. plastics) inside shielding containers with ESDS items? 4. All flexible conductive and dissipative package materials inspected before reuse or recycles? Others 1. Audit result reported to entity ESD control coordinator? 2. Corrective action from previous audits completed? 3. Are audit records complete and on file? Part No. : LTST-C150KGKT BNS-OD-C131/ Page : 11 of ...