NLP150L-96Q5366 Emerson Network Power, NLP150L-96Q5366 Datasheet - Page 2

• Manufacturer Part Number: NLP150L-96Q5366
• Description: POWER SUPPLY 5V,3.3V,12V,12V
• Manufacturer: Emerson Network Power
• Series: NLP150Lr

Specifications of NLP150L-96Q5366

• Rohs Status: RoHS non-compliant
• Voltage - Output: 3.3V, 5.1V, 12V, 12V
• Number Of Outputs: 4
• Power (watts): 150W
• Applications: Commercial
• Power Supply Type: Switching (Open Frame)
• Voltage - Input: 90 ~ 264VAC
• Mounting Type: Chassis Mount
• 1st Output: 5.1 VDC @ 20A
• 2nd Output: 3.3 VDC @ 10A
• 3rd Output: 12 VDC @ 2A
• 4th Output: 12 VDC @ 650mA
• Size / Dimension: 3.8" L x 7.8" W x 1.26" H (96.5mm x 198.1mm x 32mm)
• Power (watts) - Rated: 110W
• Operating Temperature: 0°C ~ 50°C
• Efficiency: 73%
• Approvals: CSA, UL, VDE
• Line Regulation: ±2%, ±5%
• Load Regulation: ±2%, ±5%
• No. Of Outputs: 4
• Output Voltage: 5.1V
• Output Current: 20A
• Peak Reflow Compatible (260 C): No
• Output Power Min: 110W
• Output Current 2: 10A
• Supply Voltage Max: 264VAC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 393-1041

NLP150L Series
Notes
1
2
3
4
5
6
7
8
9
10
11
International Safety Standard Approvals
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
Please consult our website for the following items:
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 110-150W AC/DC Universal Input Switch Mode Power Supplies
Free air convection.
Multiple output units: maximum continuous output power not to exceed
110W and the output current not to exceed: I
300LFM forced air cooling from the longer side.
Multiple output units: maximum continuous output power not to exceed
150W and the output current not to exceed: I
Peak output current lasting less than 30 seconds with duty cycle less than
5%. During peak loading, output voltage may exceed total regulation limits.
Figure is peak-to-peak for room temperature rating. Output noise
measurements are made across a 20MHz bandwidth using a 6 inch twisted
pair, terminated with a 10µF electrolytic capacitor and a 0.1µF ceramic
capacitor.
Minimum load required for correct start-up and operation on single outputs
and on main output of multiple versions. Failure to observe minimum load
on main output will not allow the supply to start-up correctly. Some
electronic test loads have a large delay time before they start drawing
current even though the voltage from the supply is present. During this time
delay, there is no load on the output and as a result, the supply may not be
able to start-up properly and maintain its correct output voltage. In these
instances, a dummy resistive load across the output may be necessary to
load the output of the supply until the test load can function correctly and
draw the intended minimum load. Minimum load required on auxiliary
outputs to maintain regulation.
Three orthogonal axes, random vibration 10 minutes for each axes, 2.4G
rms 5Hz to 500Hz.
For optimum reliability no part of the heatsink should exceed 110°C and no
semi-conductor case temperature should exceed 120°C.
CAUTION: Allow a minimum of 1 second after disconnecting line power
when making thermal measurements.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
The EMI specifications reference measurements made with the power
supply mounted on a grounded metal sheet extending 1 inch beyond each
edge, using an unshielded cable. No external filtering required during
conducted emissions testing but some applications may require additional
filtering to achieve system compliance
All models require a minimum mounting stand-off of 6.35mm (0.25 inches)
in the end use product.
12V, iso (V
VOLTAGE
+3.3V (V
+12V (V
OUTPUT
5.1V (V
VDE 0805/EN60950/IEC950 File No. 10401-3336-0183/326TX F13/S
Licence No. 129114
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062C
A
C
B
)
)
D
)
)
MIN
1.5A
0.5A
0A
0A
Q u a d o u t p u t
(5)
OUTPUT CURRENT
MAX
A
A
0.65A
+I
+I
2.0A
20A
10A
B
B
+2(I
+2(I
(1)
C
C
+I
+I
D
D
)≤23A.
)≤32A.
Application Note
300 LFM
3.0A
1.0A
30A
15A
(2)
150W
110W
0 C 10 C 20 C 30 C 40 C 50 C 60 C 70 C
RIPPLE
DERATING CURVE
Output Power (Watts)
120mV
120mV
50mV
50mV
300 LFM FORCED
(4)
AIR COOLING
CONVECTION
NATURAL
COOLING
REGULATION
TOTAL
±2.0%
±2.0%
±5.0%
±5.0%
File Name: NLP150LQ.PDF Rev: 04 May 2001
www.artesyn.com
NLP150L-96Q5366
NUMBERS
MODEL
55W
75W
2